Coilovers + Spacers Help, Need moar stance Options

[Chovies]

Hey All,

So the next step in my work on the car is to lower it a bit more and add spacers to the rears the get the flush look and i just wanted to get all your advice on what the best gear is etc,

1; What are some good adjustable coilovers that will work on a 94 ? Under $1000 and supplied to AUS if possible haha.

2; Same deal with spacers, how thick should i get, who should i get them from and should i fit them first so i know how low i can go ?

Rims are 18x8.5 et35 on 225/40 tires.
Here's a photo that might help with the spacer issue, its a thumbnail so click through.




PS: I know i have to get my guards rolled and all that, its no biggie yet.
Anthony

This post has been edited by Chovies: Jul 12, 2013 - 3:37 AM

[The_enD]

Be sure to do your research on rolling the fenders. What I see from a lot of people is using a heat gun, so the paint does not crack.
I didn't use one and my paint cracked, obviously. Not that I cared tho, I was repainting the area anyway.

As for coilovers, no idea, I have no experience in the field, that's why I didn't reply on it.