Coilovers + Spacers Help, Need moar stance Options

[Chovies]

Hey All,

So the next step in my work on the car is to lower it a bit more and add spacers to the rears the get the flush look and i just wanted to get all your advice on what the best gear is etc,

1; What are some good adjustable coilovers that will work on a 94 ? Under $1000 and supplied to AUS if possible haha.

2; Same deal with spacers, how thick should i get, who should i get them from and should i fit them first so i know how low i can go ?

Rims are 18x8.5 et35 on 225/40 tires.
Here's a photo that might help with the spacer issue, its a thumbnail so click through.




PS: I know i have to get my guards rolled and all that, its no biggie yet.
Anthony

This post has been edited by Chovies: Jul 12, 2013 - 3:37 AM

[ILoveMySilly97]

Dang. Coilovers are expensive there. I say get Megan Racing just because the majority of the 6gc community rides on Megan Racing. I myself have them on my car for the past 6 months and it's perfect. Lowers my car and get to adjust the dampering.

As for spacers. I'd say 5mm for front and 15mm for the rear but that'll mean you'll need more tire stretch and lower profile. Maybe run 35 or 40 series.

http://www.6gc.net/forums/index.php?showto...9&hl=harold

[The_enD]

Dang. Coilovers are expensive there. I say get Megan Racing just because the majority of the 6gc community rides on Megan Racing. I myself have them on my car for the past 6 months and it's perfect. Lowers my car and get to adjust the dampering.

As for spacers. I'd say 5mm for front and 15mm for the rear but that'll mean you'll need more tire stretch and lower profile. Maybe run 35 or 40 series.

http://www.6gc.net/forums/index.php?showto...9&hl=harold

As he mentioned, it will cost the same with shipping from the States( I checked and it's $90 more for the Megan compared to the BC).
He won't have to deal with international shipping and imagine if the send the wrong item, oh the headaches.