 3S-GE Thermostat Diameter, Tracking down a replacement... |
 Jul 21, 2013 - 8:35 AM
|
 
|
|
Enthusiast Joined Jul 21, '13 From England Currently Offline Reputation: 0 (0%)  |
Hi guys,
I finally got my new baby, a 1994 GT in red, a few months ago and I've been slowly running through a full service. Engine temperature was always low (somewhere around 1/4 - 1/3 on the gauge) and it took at least 10 minutes to get to that level (maintains that level from that point onwards) so my guess was that the thermostat was stuck slightly open. I looked at several different online parts companies and all recommended the same thermostat with a diameter of 64mm (even gives full dimensions here). I swapped the thermostat yesterday and, to my surprise, the old one was definitely bigger (~68mm) and the new one clearly doesn't fit snugly into the housing. I did a trial fit, ran the engine for a while and, sure enough, there was a slow drip leak from the base of the housing (bolts were nice and tight). My problem is that everywhere I look, they all say it's 64mm; I even tried searching for a later year in case they thought it was the rev 2, and for other car models with a rev 3 3S-GE, and every time they say it's 64mm. Everyone seems to agree on the OEM part number being 90916-03100 (also given here and here). Any ideas why everyone is trying to sell me the wrong part, and where I might find the right part? Thanks in advance. This post has been edited by incubus: Jul 21, 2013 - 8:53 AM |
 |
Replies
|
Jul 21, 2013 - 5:45 PM
|
|
|
Enthusiast  Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
Most Toyota's use the same thermostat and gasket. The one in my 00 2ZZ-GE is the same as in the MZ V6's, AZ's, S's, A's, etc. I checked out the cross reference on the parts counter screen.
-------------------- |
|
Jul 22, 2013 - 1:46 AM
|
|
|
Enthusiast Joined Jul 21, '13 From England Currently Offline Reputation: 0 (0%) |
QUOTE (Bitter @ Jul 21, 2013 - 11:45 PM)  Most Toyota's use the same thermostat and gasket. The one in my 00 2ZZ-GE is the same as in the MZ V6's, AZ's, S's, A's, etc. I checked out the cross reference on the parts counter screen. Ah, I didn't realise it was also used outside S's; that's good to know. QUOTE (BonzaiCelica @ Jul 22, 2013 - 2:36 AM) This is also confirms the OEM part numbers, which is good, but no measurements of the thermostat that I could see? |
Posts in this topic
incubus 3S-GE Thermostat Diameter Jul 21, 2013 - 8:35 AM
Bitter Does the old thermostat have a number on it? Jul 21, 2013 - 1:18 PM
incubus QUOTE (Bitter @ Jul 21, 2013 - 7:18 ... Jul 21, 2013 - 2:20 PM Bitter What kind of gasket was on the old one? What kind ... Jul 21, 2013 - 2:38 PM incubus QUOTE (Bitter @ Jul 21, 2013 - 8:38 ... Jul 21, 2013 - 2:46 PM delusionz buy genuine, make sure you order the gasket too as... Jul 21, 2013 - 3:48 PM incubus QUOTE (delusionz @ Jul 21, 2013 - 9... Jul 21, 2013 - 3:52 PM BonzaiCelica we have a winner!!
http://www.6gc.net/for... Jul 21, 2013 - 8:36 PM Galcobar One thing I noticed when I had to deal with replac... Jul 22, 2013 - 2:00 AM incubus QUOTE (Galcobar @ Jul 22, 2013 - 8:0... Jul 22, 2013 - 7:26 AM malpaso QUOTE (incubus @ Jul 21, 2013 - 3:35... Jul 22, 2013 - 3:57 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 5:35 AM |