6G Celicas Forums

Welcome Guest ( Log In | Register )

> high idle
post Jul 24, 2013 - 3:56 PM
+Quote Post
dominoslave

Enthusiast

Joined Mar 25, '13
From Eagan, MN
Currently Offline

Reputation: 0 (0%)




Car starts fine and runs fine on cold starts. On hot starts, like after running into a gas station, car is a pain to get started and once started idles at 1800-2000 rpm. I already pulled the iacv and cleaned it (it also spec'd out within range @20.6 ohms) the other day, should I just replace it? Or is there some other reason my car would be idling this high?
 
Start new topic
Replies
post Jul 25, 2013 - 7:05 PM
+Quote Post
Galcobar

Enthusiast
****
Joined Mar 3, '05
From Richmond, B.C.
Currently Offline

Reputation: 0 (0%)




Check your engine coolant temperature sensor. Pot of water and a resistance tester. At room temperature (20C) the resistance should be about 3 kOhm, at operating temperature (80C) it should be about 0.3 kOhm for a 5SFE. The 7AFE's not much different. The full chart can be found in the Fuel Injection or EFI section of the factory manual.

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 4:45 AM