3SFE and 3SGE Swap Similarities Options

[irietuning]

Hi Guys & Girls

I am kinda new to this forum, but have been using it for advice over the years. I have an issue that would be nice to get some clarification before I go ahead with my swap.

Basically, I have a 99 Rav4 with a 3SFE engine. The engine is damaged so I want to replace it as soon as possible.

On the other hand, I have a 95 st202 3SGE Engine.

I know that the engine will fit pretty easily, however, my question is to do with the wiring.

Is there any way that I can reuse the wiring loom from the Rav4 on the 3sge engine as they are pretty similar. I know that I would need to use the 3sge ecu

Thanks for any help on this

[delusionz]

i guess the swap would be like this one

http://rav4gtt.wordpress.com/page/2/

you'll need wiring diagrams for both and see for yourself, as always it will be rav4 body loom and celica engine loom

[irietuning]

i guess the swap would be like this one

http://rav4gtt.wordpress.com/page/2/

you'll need wiring diagrams for both and see for yourself, as always it will be rav4 body loom and celica engine loom

Thanks.

I have seen that site and it does answer a lot of swap issues for me. However he has used a 3sgte while I will be using the 3sge n/a engine.

I need some advice from someone who has experience with the 3sfe and the 3sge to see if the engine looks are interchangeable. The guy seems to have used a wiring guru in the states to solve his problems. This is a very expensive option for me due to the shipping cost of the two looms from the UK to USA and back


I have managed to hunt down the diagram for the rav4. Now I need to find the one from the celica

This post has been edited by irietuning: Jul 27, 2013 - 2:06 AM