 Cataltic Converter failure?, Catalytic Converter |
 Aug 15, 2013 - 3:47 AM
|
 
|
|
Enthusiast  Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%)  |
Hey all, I went to start my 95 Celica this morning and it runs like it's using 2 cylinders and is struggling to idle. I have a raspy sound from the catalytic converter when you accelerated, so I'm thinking that the Cat has given up the ghost. Can anyone confirm that this would likely be the problem? the Celica has only done 137000km but I'm going to get the Cat replaced tomorrow, so I'm hoping that will solve the issue, especially when it drove flawlessly the night before.
Cheers J |
 |
Replies
|
Aug 15, 2013 - 5:02 AM
|
|
|
Enthusiast Joined Apr 9, '13 From ACT, Australia Currently Offline Reputation: 0 (0%) |
True Box, I did notice a couple of days ago, when driving, the car slowed down a little then picked up again, maybe that was the warning sign. As for the Cat, it's a welded unit, not a bolt in, so it has to be cut out.
cheers J |
Posts in this topic
Justin73 Cataltic Converter failure? Aug 15, 2013 - 3:47 AM
Box You can remove it from the car and inspect it befo... Aug 15, 2013 - 4:21 AM Galcobar Odd that you'd have a welded-in cat, since as ... Aug 15, 2013 - 5:16 AM Justin73 checked leads,plugs and filters, all good, what ha... Aug 15, 2013 - 6:02 AM Justin73 Given that the Cat is a welded unit on the system,... Aug 15, 2013 - 6:09 AM JoshuaM First of all.... AUSSIE MEMBER!!! XD
... Aug 15, 2013 - 7:46 AM Galcobar Slight changes in pressure in the exhaust system w... Aug 15, 2013 - 2:16 PM Box If the cat is welded in it's possible it's... Aug 15, 2013 - 2:35 PM Justin73 Thanks all, I intend to agree, a buggered Cat woul... Aug 15, 2013 - 5:04 PM Justin73 Well, just took off the air inlet to the TB, and f... Aug 15, 2013 - 5:56 PM Galcobar Guide to removing -- and cleaning -- the 5SFE IACV... Aug 16, 2013 - 4:32 AM Justin73 Thanks Galco I've taken out the unit and it ... Aug 18, 2013 - 4:44 PM
Box QUOTE (Justin73 @ Aug 18, 2013 - 4:4... Aug 18, 2013 - 10:56 PM Justin73 O.k, replaced with new unit, cleaned throttle body... Aug 21, 2013 - 4:56 PM Box I'd check the timing, it's worth a shot. Aug 21, 2013 - 5:36 PM Justin73 I'll have a look Box, but would you or anyone ... Aug 21, 2013 - 6:30 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 9:25 AM |