 Timing belt slipping off the cam wheel?? |
 Aug 13, 2013 - 4:55 AM
|
 
|
|
Enthusiast  Joined Apr 10, '12 From Chicago Currently Offline Reputation: 0 (0%)  |
So the entire belt is staying in place except for the cam wheel. Passenger side motor mount is taken out and a jack is holding it up just like in the sticky guide. No covers are put on yet its just open belt waiting to be put back together. crank pulley on as well for the one guide ring. Have to wait til tomorrow night to do more work any suggestions as to why its sliding off the cam? Its pretty damn tight. Still cranking and no start. My friend is coming back tomorrow night with a compression gauge. And we are gonna take it all apart again and make sure we are at TDC for sure.
|
 |
Replies
|
Aug 19, 2013 - 12:34 AM
|
|
|
Enthusiast Joined Apr 10, '12 From Chicago Currently Offline Reputation: 0 (0%) |
Took apart throttle body and discovered all injectors were flooding. Possibly my fuel pressure regulator? Causing my car to flood out and not start? Because I dont think my timing could be so far off that I cant even start the damn thing even if I was off timed it wouldnt be that bad. Its basically like my original problem is still back and my mechanic didnt look any further than just seeing a worn out timing belt and instantly assuming that to be it.
|
Posts in this topic
SiriusVirus Timing belt slipping off the cam wheel?? Aug 13, 2013 - 4:55 AM
Tigawoods idler pulley spring? Aug 13, 2013 - 6:16 AM Smaay what engine?
look at the keyway on the crankshaft... Aug 13, 2013 - 8:33 AM SiriusVirus i have the 5sfe engine. we found tdc using a long ... Aug 13, 2013 - 2:27 PM Smaay no that shouldnt allow it to walk off. did you in... Aug 13, 2013 - 5:34 PM Bitter new tensioner pulley? Aug 13, 2013 - 8:07 PM SiriusVirus i did install the little guide. and i put new pull... Aug 13, 2013 - 10:16 PM SiriusVirus update. cam gear lined up with u notch, crank and ... Aug 14, 2013 - 4:45 AM czwalga If you're sure you have all those most likely ... Aug 14, 2013 - 6:31 AM SiriusVirus Ive been screwing with this for 2 weeks now. Spark... Aug 14, 2013 - 6:53 AM Smaay are the dots lined up properly on the gears for th... Aug 14, 2013 - 5:24 PM SiriusVirus . Otherwise, you car will either not idle properly... Aug 15, 2013 - 2:33 PM Box Being it's all of the injectors I'd be led... Aug 19, 2013 - 1:24 AM SiriusVirus Because even though the timing belt looked chewed ... Aug 19, 2013 - 2:32 AM czwalga One tooth can cause a vehicle not to start dependi... Aug 19, 2013 - 9:04 AM SiriusVirus I mean I've done it 5 times each time starting... Aug 19, 2013 - 4:18 PM SiriusVirus Timing belt was a true nightmare. BUT MY BABY LIVE... Aug 23, 2013 - 4:01 AM Box Hooray!!!! Aug 23, 2013 - 5:12 PM SiriusVirus Lmao I'm an idiot misfire was crossed spark pl... Aug 24, 2013 - 11:46 PM czwalga Nice, just an FYI you want to be around 10 degree... Aug 27, 2013 - 2:07 PM
SiriusVirus Im getting a tad rough idle misfiring but when I d... Aug 27, 2013 - 4:47 PM |
11 User(s) are reading this topic (11 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 12th, 2024 - 1:32 AM |