Coolant leak from upper radiator hose, 5sfe |
Coolant leak from upper radiator hose, 5sfe |
Feb 26, 2013 - 1:15 AM |
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
So I've been having issues with my cooling system for a long while now. It just never bothered me til now. I took a look at it after my bro drove it back from school. Which was about 20 min away most of it was on the highway. I popped open the hood just to look around and check my fluid levels since the engine is warm. I noticed it started leaking AGAIN at the upper radiator hose. It's leaking through the inner threads of the radiator hose. Now the side that connects to the engine. The color of the coolant that was leaking was brownish? I'm thinking it might be rust. The last cooling system flush I did was almost a year ago. At that time I had replaced thermostat, thermostat housing, top and bottom radiator hose, both ECT sensors, radiator cap, radiator and the fan temp sensor. My thermostat is designed to open at 175 degrees Fahrenheit. I know it opens because when I touched my bottom radiator hose it was warm but my top radiator hose was hot. I'm just wandering why it'll leak in the inner thread? Only possible answer is possible over pressure? Blockage in the engine somewhere? Any suggestions besides doing another cooling system flush?
-------------------- |
Aug 24, 2013 - 3:22 PM |
|
Enthusiast Joined Jan 16, '12 From 860, ct Currently Offline Reputation: 0 (0%) |
Possible BHG. That's what mine was doing in the weeks before it REALLY took a big one on my wallet.
|
Aug 24, 2013 - 3:44 PM |
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
Possible BHG. That's what mine was doing in the weeks before it REALLY took a big one on my wallet. Yea. That I have planned on swapping or rebuilding the engine sometime in the next 5 years so if it is a broken head gasket. Then I'll just drive until the engine dies then take it out. I warmed up the car and the heater outlet hose was actually dripping a bit also. The only hoses I didn't replace were the heater inlet and outlet so I'm going to order those and replace my old ones. -------------------- |
Lo-Fi Version | Time is now: December 12th, 2024 - 3:51 AM |