WTB: Passenger side Tail Light, 1994 Celica Coupe ST Options

[secra12]

Looking to see the price on a tail light for the passenger side (right side). Mine is being held in, for the most part, by zip ties. (The only "bolt" left in the tail light is the one for the corner)

It's been like this for years and with my sound system, the tail light bounces and rubs against the car and makes it squeak real bad.

It's the tail light with the turn signal/reverse light under the red tail light.

This post has been edited by secra12: Sep 22, 2013 - 8:19 PM

[Box]

http://www.homedepot.com/p/Gardner-Bender-...41#.UkD-09JvNRg

Use that to hold the tail light in place, run a ring all around the back where the housing meets the body. Stuff works great for holding lots of things. That or can epoxy some bolts where the old ones were to hold it.

[gen6coupe]

yeah those curren tails are hot. thats basically what i did, my passenger side got a small hole in it, so instead of buying another usdm i just bought a set of curren tails.

they are certainly pricey though!

secra12 - just FYI i put the tails up in its own FS since i do have one good one http://www.6gc.net/forums/index.php?showtopic=90710
but giving you first dibs if you want that damaged passenger tail.

This post has been edited by gen6coupe: Sep 23, 2013 - 11:35 PM

[secra12]

yeah those curren tails are hot. thats basically what i did, my passenger side got a small hole in it, so instead of buying another usdm i just bought a set of curren tails.

they are certainly pricey though!

secra12 - just FYI i put the tails up in its own FS since i do have one good one http://www.6gc.net/forums/index.php?showtopic=90710
but giving you first dibs if you want that damaged passenger tail.

Thanks dude. I'll let you know if I cant find any.

Box, I would stick the tail light to the car, but I would like to be able to just unbolt it when I need to instead of having to reseal it. Thanks for the idea though.