Conversion: 100 to 114, Questions (REAR) Options

[smkr3w]

Alright, so my passenger side rear hub seems to be 'bent' or at least it's not centered correctly. And I was looking to replace them with my friends assistance but have an itch to address.

In the discussion of this thread HERE. It was said that the xv10 Camry's rear hub/bearing assembly can bolt onto the Celica's rear; which would mean the rotors would have to be re-drilled to 5x114 to mate with the new hub. Correct?

On eBay:
94-99 Celica Rear Hub/Bearing Assembly- $230
91-96 Camry Rear Hub/Bearing Assembly- $66

I figured since the price difference is relatively large. Than I should go the conversion route
Then I wondered if I can buy rotors for a xv10 Camry, would they fit the stock brake caliper?

Upon searching I found this info (unconfirmed):
--------------------------------- 94-99 Celica -------- 91-96 Camry -----
Outside Diameter:-------------- 269mm ----------------- 269mm ---------
-------------Height:------------ 64.6mm ---------------- 64.9mm --------
---------Nom Thick:------------ 8.9mm ----------------- 10mm ----------
----------Min Thick:------------- 8mm --------------------- 9mm -----------
-------Bolt Pattern:------------ 5x100 ------------------- 5x114 ----------

So with such a small difference in Thickness, while still having the same overall Diameter, Would it be possible to utilize the Camry's rear rotor as well?

Can anyone weigh in here?? I really need to fix my rear, because sounding like a wooden rollercoaster is getting old

This post has been edited by smkr3w: Aug 24, 2012 - 6:40 PM

[ILoveMySilly97]

I'm so tired of searching for good fitment wheels for our 5x100 pattern. So can someone and if possible smkrew. Can you give a full detail on what you need to buy? Like a shopping list preferably?

From what I read is:

Front:
sxa11 rav4 front hub X2
xv10 camry front rotor X2

Rear:
xv10 camry rear rotor X2
xv10 camry rear hub X2

^^^I'm guessing it'll be the same generation Camry as for the fronts right? Also were there any modifications or were these all bolt on? Besides the need to press the front. from dan0004's post he listed "wheel bearing kit". I'm wandering if he meant you have to buy new bearings in order for the rav4 hub to fit or is he just recommending to change the bearing while you're there already? Meaning the Celica and RAV4 wheel bearing are interchangeable? Please shine more detailed and straight forward information. Sorry for asking so much but I just want a single post that has everything together instead of scrolling down and having someone say it won't work then it works then yadda yadda. Confusion. Lol.