Changing to C160 shifter box/cables possible without changing gearbox, gearbox is going to be changed later on Options

[onnaj]

I bought myself a nice C160 gearbox with LSD lately and within a month (i hope) we're going to put it in the Celica. We wanted to put it in this weekend but i'm ill unfortunately.

I have removed the center console and other parts to get to the shifter box. I'd rather not mount them again and then do the dismount and mount all over again at the time we're going to put the 6-speed in.

I;m wondering if i could change to the C160 shifter box and cables in advance and using it with my own C52 gearbox. Would this be possible you guys think?

Only 'problem' i could imagine is that putting it in the 1st gear is a bit more difficult, but besides that??

Thanks!

This post has been edited by onnaj: Oct 12, 2013 - 7:33 AM

[Smaay]

well when you upgrade the 7th gen GT to a 6 speed you dont have to do this. its a 1 for 1 transmission swap.

im not sure about the 6th gen, but i dont think you will have to modify anything

[onnaj]

well when you upgrade the 7th gen GT to a 6 speed you dont have to do this. its a 1 for 1 transmission swap.

im not sure about the 6th gen, but i dont think you will have to modify anything

Overe here all 7th gens have 6 speed gearboxes. Never understood the fact that the Corolla (G6®) was equipped with a 6 speed and the Celica wasn't. But i never understood why the Levin wasn't sold in europe and the VS.