Coilovers + Spacers Help, Need moar stance Options

[Chovies]

Hey All,

So the next step in my work on the car is to lower it a bit more and add spacers to the rears the get the flush look and i just wanted to get all your advice on what the best gear is etc,

1; What are some good adjustable coilovers that will work on a 94 ? Under $1000 and supplied to AUS if possible haha.

2; Same deal with spacers, how thick should i get, who should i get them from and should i fit them first so i know how low i can go ?

Rims are 18x8.5 et35 on 225/40 tires.
Here's a photo that might help with the spacer issue, its a thumbnail so click through.




PS: I know i have to get my guards rolled and all that, its no biggie yet.
Anthony

This post has been edited by Chovies: Jul 12, 2013 - 3:37 AM

[DUHCHINKYAZN]

Hey All,

So the next step in my work on the car is to lower it a bit more and add spacers to the rears the get the flush look and i just wanted to get all your advice on what the best gear is etc,

1; What are some good adjustable coilovers that will work on a 94 ? Under $1000 and supplied to AUS if possible haha.

2; Same deal with spacers, how thick should i get, who should i get them from and should i fit them first so i know how low i can go ?

Rims are 18x8.5 et35 on 225/40 tires.
Here's a photo that might help with the spacer issue, its a thumbnail so click through.




PS: I know i have to get my guards rolled and all that, its no biggie yet.
Anthony

Hey Chovies!

Try Bc Br coilovers. Im on them at the moment and fully lowered; my car is about 3cm off chassis. Dont know how low you want to go but yeah. Also i got mine off ebay, for just under $1000 posted to your door less than 4days (and im in Western Australia!!)

And for wheel spacers, try ichiba, got them off ebay as well. Approx $450 all up with postage. Im current running 30mm on front and 38mm on rear (hubcentric ofc)

Firstly get your coilovers, then lower your car to where your happy and then get spacers. Thats what i did anyway.

But thats my opinion! Goodluck!


My thread:
http://www.6gc.net/forums/index.php?showtopic=89426

(if theres anything in there that can help yah)