Noise from front drivers side, Think it might be the motor mount Options

[mgnt232]

Ok so just recently a pretty loud noise has started coming from the 'front drivers side wheel area'.

The noise is ONLY when I'm accelerating/on the gas at all. As soon as I take my foot aft the gas it stops (kind of a squealing/clunking/grinding noise). Thats why I'm thinking it could be the rear motor mount, if its bad then it would tweak a little and the axle wouldn't line up the way its supposed to right?

I jacked the car up and no noises just spinning the wheel, bearing doesn't seem to have any play in it. All the other suspension parts a like brand new.

Just trying to narrow it down, if its ONLY when I press on the gas, what else could it be?

I took a pic of the front and rear mounts, and the rear looks a lot worse, but idk if that bad enough to make the noises.

Rear - It looks a lot more worn down



Front - looks in a lot better shape




Found a poly mount wondering if it will work, idk how they replace the one now? like how does the rubber part come out? or is there a better mount option?
http://speed-source.net/?wpsc-product=toyota-engine-mounts
says for gt4, but the gt mounts should be the same right?


This post has been edited by mgnt232: Dec 3, 2013 - 1:32 PM

[lagos]

Just trying to narrow it down, if its ONLY when I press on the gas, what else could it be?

I used to have a lot of issues with the stock mounts and the 3sgte. They just give out over time. A good test is to put the e-brake on, put the car in first, and slowly let the clutch out with the hood open. Youll see just how much the engine is moving around, and any clunks should show up. The inserts totally cured the problem for me, and I've had no issues since installing them.


But if this doesn't fix your problem, check your axles and control arms. Those are pretty much the only other things that could cause the noise you're hearing.

This post has been edited by lagos: Dec 7, 2013 - 1:38 PM

[mgnt232]

My Ebrake is disconnected lol
The axles are brand new so hopefully thats not it. And the Control arms i bought used with "10k" on them, they looked pretty new so I doubt its that either.
i got a new rear mount from the dealer (front looks ok) and kirk inserts (front and rear) will be here monday. I will post an update when I swap them out.