![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 5, '12 From Sacramento Currently Offline Reputation: 3 (100%) ![]() |
Seems like the problem wont go away upon cold start this happens it starts yet idles low i gotta push the gas to at least 2k for about 35 seconds
(sorry for text message ringtone) ![]() and it begins dropping low to about 300 and my car begins to rattle ALOT. ![]() but once the engine is all warmed up it idles here and everything goes back to normal.(same vid posted from previous post) ![]() this coldstart is becoming an issue now any ideas guys? -------------------- |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) ![]() |
Constant flashing means no codes, but just because the light isn't on doesn't mean everything is good. The BEAMS only illuminates the light for a few codes, so it's not a bad idea to check it any time you think something is up.
You should probably replace your fuel filter anyway but that isn't the issue. I know it's quite a bit of money but I highly suggest buying a wideband to see what your engine is doing. It could be a faulty FPR, but I'd think that would cause problems after the engine is warmed up as well. -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
![]() 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 1:37 AM |