6G Celicas Forums

Welcome Guest ( Log In | Register )

> >>3.4 5vz-fe v6 into a 94 st, and v6 swap questions<<, Looking at the cost of the swap and whats needed
post Jan 15, 2014 - 1:56 AM
+Quote Post
hdnseek

Enthusiast
*
Joined Jan 10, '14
From Des Moines
Currently Offline

Reputation: 0 (0%)




So i recently bought a 94 celica st 7afe, want more power obviously and found a 5vz-fe from a 4runner for 500 with ecm and all wiring. Was inquiring how much work would be needed to swap this in vs 3vz or 1mz. Also what transmission would i need. I have read k-esds swap but i just want to clarify if its more complicated swapping it into a st than a gt. What motor mounts would be needed, what axles, and such. If i can keep it a cheaper swap and not extensively hard ill go for it. Anyone shed some light on this? smile.gif
 
Start new topic
Replies
post Jan 15, 2014 - 6:23 PM
+Quote Post
hdnseek

Enthusiast
*
Joined Jan 10, '14
From Des Moines
Currently Offline

Reputation: 0 (0%)




Well I'm new to the platform. I wanna swap a v6 in my 94 st but don't know what would be the easiest being one1 with the wiring. 1mz has the sludge problem and 3vz is almost 100 lbs heavier than the 1mz. So torn which route to pursue

Posts in this topic
- hdnseek   >>3.4 5vz-fe v6 into a 94 st, and v6 swap questions<<   Jan 15, 2014 - 1:56 AM
- - njccmd2002   are you doing RWD swap? because i dont see swappi...   Jan 15, 2014 - 6:59 AM
|- - Smaay   QUOTE (njccmd2002 @ Jan 15, 2014 - 3...   Jan 15, 2014 - 10:02 AM
- - hdnseek   Ha I didn't even think to check Rwd. So I...   Jan 15, 2014 - 8:36 AM
- - njccmd2002   hence why rwd does not fit, its not tilted, its to...   Jan 15, 2014 - 4:29 PM
- - Smaay   im just guessing on the hood clearance, they fit i...   Jan 15, 2014 - 5:54 PM
- - hdnseek   Well I'm new to the platform. I wanna swap a v...   Jan 15, 2014 - 6:23 PM
- - njccmd2002   why? freedom of speech..... it wont fit. lol ...   Jan 15, 2014 - 6:25 PM
- - hdnseek   What engine would be easiest to swap in with the o...   Jan 15, 2014 - 7:02 PM
- - njccmd2002   1mz..   Jan 15, 2014 - 9:05 PM
- - hdnseek   Why 1mz.. most say it's more complex and obd2 ...   Jan 15, 2014 - 9:18 PM
- - njccmd2002   because 2 + members have already done the job in h...   Jan 16, 2014 - 7:16 AM
- - Smaay   OMG!!!! dude, the engine will sit ...   Jan 16, 2014 - 9:59 AM
|- - njccmd2002   QUOTE (Smaay @ Jan 16, 2014 - 8:59 A...   Jan 16, 2014 - 5:08 PM
- - hdnseek   Well found a 1mz out of a 94 Camry with trans crad...   Jan 16, 2014 - 3:41 PM
- - Smaay   i love it! oh and for the 1MZ sludge problem...   Jan 18, 2014 - 12:34 AM
- - mkernz22   the 1mz i got has 256,000 miles on it and there is...   Jan 18, 2014 - 12:56 AM
- - fhalperformance   I have done a 5vz swap in my mr2 and it didnt fit ...   Jan 18, 2014 - 9:16 PM
- - Smaay   well there you go, personally I wouldnt waste time...   Jan 18, 2014 - 10:55 PM
|- - fhalperformance   QUOTE (Smaay @ Jan 18, 2014 - 11:55 ...   Jan 18, 2014 - 11:23 PM
- - 95CelicaST   It really depends on how much effort you want to p...   Jan 19, 2014 - 1:28 AM
- - hdnseek   Well that is what I need your help for, I mean I h...   Jan 19, 2014 - 2:40 AM
- - kurt95gt   There are no write ups because all 3 of our harnes...   Jan 19, 2014 - 7:30 PM
- - 95CelicaST   Yeah, granted mine is a bit more complicated as mi...   Jan 20, 2014 - 1:48 AM


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 1:33 AM