 JasonTX |
 Mar 23, 2010 - 10:22 PM
|
 
|
|
Enthusiast  Joined Mar 1, '10 From TX Currently Offline Reputation: 16 (90%)  |
i've always been an admirer of this gen celica and toyotas in general. i have a 91 turbo mr2 and after selling my 93 alltrac i thought another daily would be nice. i dont really know much about the 5s motor. but after some research and about a half year of looking for a 6gc i finally found one.so last friday and made the couple hundred mile trip from houston to austin and back to bring it home. its a black 94 GT hatchback. the car had been in storage for 2 years but after a battery change and a fresh tank of gas it started right up and made it all the way home without a hickup. My primary purpose for the celica is to have a comfortable, sporty looking and reliable car i enjoy driving. thus far i'm not dissapointd its smoother and quieter than any of my previous vehicles, plus more fuel efficent and after the tune up i can determine nothing wrong with the motor.
i've talkd to many on the forums while searching for my car and options for it, and am glad to have found a place where so many enthusiasts are willing to offer their advice and share their knowledge.like many others here i wanted to start cataloging my progress. both to se how far my car has come and to try and offer something back to the community so thanks to everyone who has helped me out. feel free to comment or offer suggestions and pics and writeups of my progress will be coming soon peace -jec   
This post has been edited by JasonTX: Mar 24, 2010 - 9:05 AM -------------------- JN 3:16
-------------------------------------- |
 |
Replies
|
Jan 16, 2014 - 9:38 PM
|
|
|
Enthusiast Joined Mar 1, '10 From TX Currently Offline Reputation: 16 (90%) |
got the W2A heat exchanger and pump today from bsamps. Ben you did such a great job packing the stuff up i almost had to go front mount cause i couldent get it out of the box, thanks for taking the time bud
 also got a little paint on the block and everything off that need to be off before i set it back on the engine stand. i only have a few days before i leave for work again so i've been tring to spend at least an hour on it in the evenings, consequently my shop is a mess.  also the first of the parts i ordered via amazon link from 6gc, it's cool to be able to support the site and get to feed my habit at the same time haha. i may have to get a little point and shoot from amazon too i've been using my wife's cannon and its too big to run around with i'm am afraid i'm gonna break the lens or something.  -------------------- JN 3:16
-------------------------------------- |
|
Jan 18, 2014 - 10:23 AM
|
|
|
Enthusiast Joined May 16, '10 From Raleigh Currently Offline Reputation: 12 (100%) |
QUOTE (JasonTX @ Jan 16, 2014 - 10:38 PM)  got the W2A heat exchanger and pump today from bsamps. Ben you did such a great job packing the stuff up i almost had to go front mount cause i couldent get it out of the box, thanks for taking the time bud also got a little paint on the block and everything off that need to be off before i set it back on the engine stand. i only have a few days before i leave for work again so i've been tring to spend at least an hour on it in the evenings, consequently my shop is a mess. also the first of the parts i ordered via amazon link from 6gc, it's cool to be able to support the site and get to feed my habit at the same time haha. i may have to get a little point and shoot from amazon too i've been using my wife's cannon and its too big to run around with i'm am afraid i'm gonna break the lens or something. LOL...Any time man! --------------------  |
Posts in this topic
JasonTX JasonTX Mar 23, 2010 - 10:22 PM
cheela aww.. i wish i had your two previous cars. why... Mar 23, 2010 - 10:26 PM
JasonTX QUOTE (cheela @ Mar 23, 2010 - 11:26... Mar 23, 2010 - 10:36 PM CelicaST_CALI Good logic .Do u have any plans for the car?ie:rim... Mar 23, 2010 - 10:39 PM JasonTX QUOTE (CelicaST_CALI @ Mar 23, 2010 - 11... Mar 24, 2010 - 9:04 AM 96stgreendemon 7th gen shorty shifter, do it Mar 24, 2010 - 11:15 AM spolski07 where abouts in austin you located? (austin is jus... Mar 24, 2010 - 11:51 AM JasonTX QUOTE (spolski07 @ Mar 24, 2010 - 11... Mar 24, 2010 - 12:05 PM spolski07 QUOTE (JasonTX @ Mar 24, 2010 - 12:0... Mar 24, 2010 - 1:56 PM JasonTX QUOTE (spolski07 @ Mar 24, 2010 - 2... Mar 25, 2010 - 9:28 AM JasonTX My latest addition.sorry about the night pics will... Apr 6, 2010 - 9:38 PM Success21 QUOTE (JasonTX @ Apr 6, 2010 - 9:38 ... Apr 6, 2010 - 11:08 PM JasonTX got my gt4 front in and put on. next i wanna start... Sep 18, 2010 - 10:12 PM stephen_lee we have a tx meet going on in oct. you should join... Sep 19, 2010 - 6:26 PM Spider77 Was gunna whore that, but got beat to it. Go to t... Sep 19, 2010 - 6:44 PM JasonTX QUOTE (stephen_lee @ Sep 19, 2010 - 6... Sep 19, 2010 - 7:50 PM Spider77 Should do it! Sep 19, 2010 - 8:01 PM JasonTX been a long time since i've posted in this thr... Dec 2, 2011 - 1:57 AM cheela same color or different? Dec 2, 2011 - 2:24 AM JasonTX QUOTE (cheela @ Dec 2, 2011 - 3:24 A... Dec 2, 2011 - 2:36 AM SwissFerdi QUOTE (JasonTX @ Mar 23, 2010 - 10:2... Dec 2, 2011 - 10:12 AM JasonTX just a cell phone pic but paint came out good.
st... Dec 5, 2011 - 10:22 PM Malhar95 how much did the paint cost u and where'd u ge... Dec 6, 2011 - 1:00 AM JasonTX QUOTE (Malhar95 @ Dec 6, 2011 - 1:00... Dec 6, 2011 - 2:07 AM Malhar95 QUOTE (JasonTX @ Dec 6, 2011 - 2:07 ... Dec 6, 2011 - 4:37 AM JasonTX a friend of mine has his own shop and did it for m... Dec 6, 2011 - 5:18 PM Neon90424 for some reason that rear spoiler seems to be too ... Dec 6, 2011 - 5:38 PM matts94celica Brenham huh? I live like 5 mind away from somervil... Dec 6, 2011 - 11:39 PM JasonTX QUOTE (matts94celica @ Dec 7, 2011 - 12... Dec 7, 2011 - 2:21 AM matts94celica Sounds good just shoot me a pm when your back and ... Dec 7, 2011 - 10:18 AM JasonTX just got in my 7th gen short shifter in the mail t... Jan 17, 2012 - 2:47 PM celiracer Welcome! cars coming along good and quick man.... Jan 17, 2012 - 5:49 PM 02bluerolla oh snap i didnt know there was a another celica wi... Jan 17, 2012 - 9:10 PM JasonTX yeah , i've actually seen a lot of your posts ... Jan 17, 2012 - 9:55 PM Smaay you had a 93 All-Trac and got rid of it? where you... Jan 18, 2012 - 4:03 PM JasonTX lol, i got an offer for it and i thought it was wo... Jan 18, 2012 - 10:41 PM JasonTX shifter swapped in , for 12 bucks on ebay this if ... Jan 21, 2012 - 4:01 PM JasonTX pic of the new shifter
and another ebay pick... Feb 1, 2012 - 9:40 PM TRD_Ian can u post an add to that mirror im interested in ... Feb 2, 2012 - 10:25 PM JasonTX http://www.ebay.com/itm/Gentex-261-Auto-di...6#ht_... Feb 3, 2012 - 12:15 AM JasonTX just recieved another package today Feb 6, 2012 - 9:42 PM SwissFerdi Pretty. Feb 7, 2012 - 7:32 PM opie_7afe any updates? you get that opti-coat put on? paint ... Feb 29, 2012 - 11:19 PM JasonTX well its been a while since i've really been a... Nov 20, 2013 - 12:36 AM 02bluerolla Another 3s celica in TX! What transmission ar... Nov 21, 2013 - 1:28 PM JasonTX got a couple of options with the celica/mr2 parts ... Nov 21, 2013 - 5:10 PM JasonTX chugged away at it a little more this evening. got... Nov 22, 2013 - 6:09 PM bsamps4 All depends on what your plans are. If you're ... Nov 23, 2013 - 8:22 AM JasonTX I've been snooping the forums and online for p... Nov 24, 2013 - 9:32 AM JasonTX took em to the machine shop to get hot tanked, the... Dec 12, 2013 - 1:50 PM bsamps4 Looks really nice man! Keep up the good progre... Dec 13, 2013 - 7:30 AM JasonTX got to put in a couple hours tonight before i had ... Dec 17, 2013 - 10:44 PM JasonTX well back in town for jury duty tomarrow morning. ... Jan 5, 2014 - 8:55 PM JasonTX had to go back up to the shop to get a bolt to mat... Jan 5, 2014 - 11:44 PM MR2fanatic Great work and nice choice of cars! Jan 6, 2014 - 11:26 PM JasonTX QUOTE (MR2fanatic @ Jan 6, 2014 - 11... Jan 8, 2014 - 1:11 PM JasonTX well it took a lot of work by hand to get to this ... Jan 8, 2014 - 9:30 PM JasonTX had a little time this evening so plugged away at ... Jan 15, 2014 - 8:35 PM bsamps4 QUOTE (JasonTX @ Jan 16, 2014 - 10:3... Jan 18, 2014 - 10:23 AM JasonTX two very big pieces to my puzzle finally arrived t... Jan 17, 2014 - 7:53 PM JasonTX I've been tring to take a lot of pictures to p... Jan 21, 2014 - 12:38 AM JasonTX more amazon parts and more fitting and putting it ... Jan 25, 2014 - 9:48 PM JasonTX same old story just putting in a few minutes whene... Feb 2, 2014 - 9:20 PM JasonTX with all the delays with work and life i'm not... Mar 23, 2014 - 10:52 PM japukspares I love the work that you are doing on the engine. ... Mar 24, 2014 - 7:49 AM JasonTX QUOTE (japukspares @ Mar 24, 2014 - 8... Mar 24, 2014 - 3:22 PM JasonTX a couple more things
rod and main bearings came i... Mar 31, 2014 - 8:20 AM JasonTX been out for work most of the summer but a friend ... Aug 12, 2014 - 8:45 AM JasonTX water injection nozzels
distribution block
ho... Aug 12, 2014 - 8:55 AM JasonTX went with the drift motion(left) oil feed and drai... Aug 12, 2014 - 9:50 AM JasonTX reinstalled it several times but not very happy wi... Aug 12, 2014 - 10:39 AM JasonTX Harness getting a little repair and rewiring
al... Aug 12, 2014 - 11:14 AM JasonTX finally ready to get the old motor out and get the... Aug 12, 2014 - 11:47 AM Malhar95 Congrats man! That's motiving me, can I co... Aug 12, 2014 - 11:53 AM enderswift Oh my god you've been holding out on us! S... Aug 12, 2014 - 2:02 PM JasonTX QUOTE (Malhar95 @ Aug 12, 2014 - 12... Aug 12, 2014 - 6:11 PM Special_Edy Would you be interested in selling the 5s? I spun ... Aug 13, 2014 - 3:02 PM JasonTX QUOTE (Special_Edy @ Aug 13, 2014 - 3... Aug 13, 2014 - 3:07 PM richee3 Everything on the new motor looks great! Excel... Aug 13, 2014 - 3:31 PM JasonTX thanks bud, looking forward to getting it back on ... Aug 16, 2014 - 9:32 AM JasonTX No chance to get down to houston today but i did g... Aug 18, 2014 - 5:57 PM Batman722 If you have questions, post em up. Aug 18, 2014 - 6:23 PM JasonTX wow thanks bud. that's just what i needed, tha... Aug 18, 2014 - 7:23 PM Batman722 PM me your email address, I'll send you the ED... Aug 18, 2014 - 8:47 PM JasonTX quick question.
anyone have the size on the belt... Aug 19, 2014 - 2:21 AM JasonTX couple of additional pics. not new stuff but final... Aug 20, 2014 - 2:11 AM JasonTX making a bracket to hold the water injection distr... Aug 20, 2014 - 4:15 PM enderswift You will enjoy this. Make sure you ground it at th... Aug 20, 2014 - 4:43 PM JasonTX QUOTE (enderswift @ Aug 20, 2014 - 4... Aug 20, 2014 - 4:51 PM enderswift Ground the cutout at the chassis. Otherwise it use... Aug 20, 2014 - 10:18 PM JasonTX QUOTE (enderswift @ Aug 20, 2014 - 10... Aug 21, 2014 - 12:47 AM JasonTX Thanks again to dustin, used the files you sent me... Aug 23, 2014 - 1:36 AM |
12 User(s) are reading this topic (12 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 2:20 AM |