 valve lash adjustment |
 Jan 12, 2014 - 1:27 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
I have a 1996 5sfe 2.2 engine. you know if this engine can have valve lash adjustments made? if not, what is the solution? I think I have that tickey tickey going on...
|
 |
Replies
|
Jan 20, 2014 - 10:22 PM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
It was just making a tickey tickey sound that was annoying. I didn't drive bad or anything. I had the engine rebuilt professionally about 28,000 miles ago and it drives real good. I also had new aftermarket colt cams installed about 10K miles ago. The specs were perfect then.
My mechanic said even still, it's probably either fuel injector or valve lash needs adjusting. He said it's recommended at 30,000. Bottom end is strong and quite - mech used a stethoscope to listen to both top end and bottom. He said the top is definitely ticking and it doesn't sound normal but not bad either I guess, just really annoying. Always used mobile 1 full synthetic after break in. oil pressure maintains 60 psi warmed up at highway speed and 20 psi at idle. Just trying to maintain the car as best I can. I want to keep it until it rots anyway. This post has been edited by 6G96GT: Jan 20, 2014 - 10:23 PM |
Posts in this topic
6G96GT valve lash adjustment Jan 12, 2014 - 1:27 PM
Bitter You need to use a feeler gauge to check then repla... Jan 12, 2014 - 3:48 PM Smaay Like Bitter said, with teh cam lobe pointing up, s... Jan 12, 2014 - 4:47 PM 6G96GT Ok guys, good to know. Thanks for posting! Jan 13, 2014 - 8:12 AM Tigawoods there are minimum and maximum clearance levels for... Jan 13, 2014 - 9:07 AM Special_Edy I just did mine, I had one exhaust valve at .08mm ... Jan 17, 2014 - 2:59 AM
ILoveMySilly97 QUOTE (Special_Edy @ Jan 17, 2014 - 12... Apr 21, 2014 - 6:53 PM Bitter Does it feel any better now? Were you getting any ... Jan 17, 2014 - 8:46 AM thymeclock QUOTE (6G96GT @ Jan 20, 2014 - 11:22... Apr 21, 2014 - 8:51 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 2:36 PM |