 How to change ball joint (boot) |
 Jan 20, 2014 - 9:04 AM
|
 
|
|
Enthusiast  Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%)  |
Hello,
My celica didn't pass the yearly test because of a worn ball joint cover and the light adjustment. I'm wondering though how to replace the ball joint? Can't find a write up about it unfortunately so i don't know how much work is involved with it. Is it also possible to just change the boot for an aftermarket one? Thanks! -------------------- |
 |
Replies
|
Jan 21, 2014 - 2:19 PM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
True story. Sadly, last time I did it was in a carport at my apartment with only the scissor jack from the trunk, a ratchet set and end wrench set, needle nose pliers, a pry bar for the control arm, and a small hammer.
QUOTE (richee3 @ Sep 19, 2013 - 11:08 AM)  Got the radiator cooling panel and new ball joints installed today.     Then the next day, I made the 1,200 mile trip to Rhode Island. -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Posts in this topic
onnaj How to change ball joint (boot) Jan 20, 2014 - 9:04 AM
ILoveMySilly97 QUOTE (onnaj @ Jan 20, 2014 - 6:04 A... Jan 20, 2014 - 1:12 PM onnaj That's the thing i mean i guess. The lower bal... Jan 20, 2014 - 1:41 PM VavAlephVav check out this how-to on replacing the CV axle ass... Jan 20, 2014 - 2:10 PM onnaj Isn't a better option then to get the whole ax... Jan 20, 2014 - 2:22 PM VavAlephVav if you know your axles are good then yes, you can ... Jan 20, 2014 - 2:30 PM richee3 I generally don't use a pickle fork or take my... Jan 20, 2014 - 2:36 PM njccmd2002 or if you have air tools, and air hammer gets it o... Jan 21, 2014 - 3:10 AM onnaj I have air tools happily Jan 21, 2014 - 3:11 AM SwissFerdi ^ Use those. I don't know what this new modera... Jan 21, 2014 - 7:06 AM rave2n I've always had to take the axle out, tried th... Jan 21, 2014 - 9:10 AM onnaj According to the guy that works at Toyota it shoul... Jan 21, 2014 - 10:06 AM
VavAlephVav QUOTE (richee3 @ Jan 21, 2014 - 3:19... Jan 21, 2014 - 8:56 PM onnaj So it has been done
Biggest problem was for the... Jan 23, 2014 - 11:18 AM richee3 It sounds like a difficult job but there's rea... Jan 23, 2014 - 12:34 PM ILoveMySilly97 QUOTE (richee3 @ Jan 23, 2014 - 9:34... Jan 23, 2014 - 2:13 PM onnaj QUOTE (ILoveMySilly97 @ Jan 23, 2014 - 8... Jan 23, 2014 - 2:52 PM |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 21st, 2025 - 11:02 PM |