 rev problem, gen 3 3SGTE |
 Jan 26, 2014 - 10:08 PM
|
 
|
|
Enthusiast Joined Apr 15, '11 From Lima-Peru Currently Offline Reputation: 0 (0%)  |
hi,
Does any one know why my gen3 3sgte is revving until 5.8K-5.9K? I have changed the rotor cap, rotor, wires, spark plugs, checked vacuum, fuel pressure and every thing is normal. My ignition mods are: MSD SS coil MSD 6AL 6425 MSD tach adapter NGK wires sparkplug IK20 (same problem) sparkplug BKR7EIX (same problem) New rotor and cap There is no diagnosis code stored on the ecu and running on RON97. http://www.youtube.com/watch?v=C9oS82K9QJ0...pEwUQlAG_mQcjFg my 3sgte This post has been edited by ssj3timy: Jan 26, 2014 - 10:10 PM |
 |
Replies
|
Jan 29, 2014 - 10:07 PM
|
|
|
Enthusiast Joined Apr 15, '11 From Lima-Peru Currently Offline Reputation: 0 (0%) |
the 6AL is set to 7200 rpm, also when is set to a higher rpm it doesn't matter, the cut is still on 5800-5900 rpm. besides, when I set to less rpm the 6AL cut the ignition. I think that the 6AL si operating properly. I just check the camshaft pulley and is set to the correct tooth. I was running at 12° without any problems at 15psi. so I'm going to set it at 10° and see whats happen.
|
Posts in this topic
ssj3timy rev problem Jan 26, 2014 - 10:08 PM
Bitter Check the cam timing just to make sure nothing sli... Jan 26, 2014 - 10:20 PM WannabeGT4 Sounds like the rev limiter. Are you sure the 6AL ... Jan 27, 2014 - 9:19 PM Smaay check the cam timing. i had a similar incident in ... Jan 29, 2014 - 1:21 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 7:30 AM |