 HELP.. RED TOP BEAMS, 3sge 2.0 GT 94 swapped out with a BEAMS |
 Mar 21, 2014 - 12:19 PM
|
 
|
|
Enthusiast Joined Mar 21, '14 From Denmark Currently Offline Reputation: 0 (0%)  |
Hi everyone, I'm new here on forum.
I have swapped out my old engine and I have put in a red top beams engine. I tried starting it today but it didn't fire, and I saw a topic about connecting the red/black wire with the black at the EA1 plug. It worked and it started and died 2 sekunds after. First of I thought it was vacuum problem coursing it to die out, because if I gave it some revs I could keep it alive. By some reason I tried disconnect the airflow sensor, and now it runs "perfect" (Engine failure light on). I'm I missing a wire to connect or something, or is it a new air flow sensor? It gets +B and earth, and I have tested the other 3 wires and it seems like they give some signal |
 |
Replies
|
Mar 21, 2014 - 3:47 PM
|
|
 Moderator  Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
 If it's available near you. As long as the MAF (mass air flow sensor) is in the OEM MAF housing, you should be good. It's a very, very sensitive MAF that needs to be in that housing so it gets an accurate reading, otherwise the engine won't run properly, but it sounds like your setup should work. DO you have a picture of your intake setup? -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Posts in this topic
NICOGP HELP.. RED TOP BEAMS Mar 21, 2014 - 12:19 PM
richee3 We need a little more information from you. What i... Mar 21, 2014 - 1:15 PM
NICOGP QUOTE (richee3 @ Mar 21, 2014 - 2:15... Mar 21, 2014 - 2:06 PM NICOGP I tried cleaning the MAF and it didn't help, n... Mar 23, 2014 - 4:09 AM Batman722 MAF = Mass Air Flow sensor
pics will help. Do you... Mar 21, 2014 - 7:18 PM NICOGP I'll get some pictures as soon as possible, I... Mar 22, 2014 - 1:48 AM NICOGP Maybe a stupid question, but how do I insert a pi... Mar 22, 2014 - 4:35 AM NICOGP The o2 sensor is connected, I plugged the old one ... Mar 22, 2014 - 4:41 AM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 1st, 2024 - 8:08 PM |