![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Oct 18, '06 From cincinnati Currently Offline Reputation: 10 (100%) ![]() |
2nd gen 3sgte swap is hesitating and won't boost.
Got 3 codes - 35, 43 & 71. MAP sensor, Starter sensor & EGR valve. Retried removing MAP, no change. Replace MAP sensor, no change. No EGR since swap, hasn't been a problem, understand code 71. Starter sensor? Could be causing rough startup as it says its not feeding a signal to the fuel pump. OK, but car starts fine. No boost, not in any gear, not free reving, never. I can hear the turbo spool but nothing. VAC/Boost sensor only gets to 0. Perhaps wastegate stuck open? Bad ECU? no major upgrades (fmic), should be in-time, only 12k miles on the swap. rebuilt engine has been running great, no overheating, no other abnormalities. All help is appreciated. -------------------- proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]
309,000 miles n' .... |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) ![]() |
take a look at the wastegate actuator, see if it moves freely. try to pull it in. you could also blow air into the vacuum port and see if it opens.
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 10:45 AM |