May 15, 2014 - 1:32 PM
|
|
|
Enthusiast ![]() Joined Feb 5, '13 Currently Offline Reputation: 0 (0%) |
Hey guys I have a 94 celica st automatic transmission, I brought this car back to life after 3 years of sitting, The car ran fine and everything but when i was doing exhaust work i put everything back together and now all of a sudden I have a vibration at 900 and below rpm and anything over 3500 rpm it makes the vibration. I ruled out the exhaust since I just got done redoing the entire system, for good measure though i will be double checking this. It sounds like its coming from the back of the motor and on the driver side, I suspected a transmission problem? So I flushed the whole system and put in brand new fluid and filter as well. I can drive the car around just fine and never over heats and the vibration only comes at certain rpm NOT SPEED. So I thought what the heck why not take out the starter and see whats going on with that. So I took out the starter and it looks fine, no chipping of gears or anything. The engine is very stable and has no idling problems so i ruled out being an engine performance problem, I also replaced all of the engine mounts and still no luck. Anyone have an idea of what this could be?????
|
Langing QUOTE (rapid36 @ May 15, 2014 - 2:32... May 15, 2014 - 3:19 PM
Special_Edy Check the powersteering pump brackets, they were l... May 15, 2014 - 4:05 PM
rapid36 QUOTE (Special_Edy @ May 15, 2014 - 5... May 15, 2014 - 4:14 PM
rapid36 QUOTE (Special_Edy @ May 15, 2014 - 5... May 16, 2014 - 1:04 PM
Special_Edy Check the torque converter bolts, one time I plast... May 16, 2014 - 7:11 PM
rapid36 Hey thanks! I confirmed that it's the torq... May 17, 2014 - 1:11 AM![]() ![]() |
| Lo-Fi Version | Time is now: October 26th, 2025 - 9:09 AM |