 5s oil pan tips please =) |
 May 22, 2014 - 9:19 PM
|
 
|
 Enthusiast  Joined May 30, '10 From PA Currently Offline Reputation: 0 (0%)  |
Hey guys,
I just found that my oil Pan on my 5s has a crack that's leaking alot of oil. I have changed pans before but only with the engine out. So I was wonder if there are any tricks or tips you guys can give me on changing it with the engine instill in the bay. Anything would be appreciated. Thanks! -------------------- ...5sFREAK...
|
 |
Replies
|
May 23, 2014 - 5:40 PM
|
|
 Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
Or if the pan is all jacked up you can buy a cork oil pan gasket from Autozone. Felpro lists it for the camry 5S but I think I found it in the system looking for my 94 Celica. You still need to FIPG it but it held many thousands of miles on my old 5S before it decided to spin a rod bearing.
With FIPG you want to hand tighten the bolts and nuts down as tight as you can get them with just an extension and no ratchet. Let it sit for 24 hours then go back and torque the bolts down to spec. This will give you the best seal. This post has been edited by Special_Edy: May 23, 2014 - 5:44 PM |
Posts in this topic
hokuten3 5s oil pan tips please =) May 22, 2014 - 9:19 PM
njccmd2002 yes just pull it out... use a hammer, and torch..... May 22, 2014 - 9:59 PM hokuten3 Sweet! Even with pics! Haha. Thanks alot... May 22, 2014 - 10:10 PM Special_Edy Put the front end of the car on jackstands. Under ... May 22, 2014 - 10:33 PM hokuten3 Thanks for the step by step=) will definitely come... May 22, 2014 - 11:06 PM njccmd2002 oh you forgot this.. May 23, 2014 - 12:45 AM
rave2n QUOTE (njccmd2002 @ May 23, 2014 - 12... May 23, 2014 - 6:01 AM Smaay QUOTE (Special_Edy @ May 23, 2014 - 3... Jun 11, 2014 - 1:02 PM hokuten3 Yea, I got the cork gasket from AutoZone for 12.99... May 23, 2014 - 7:05 PM Smaay QUOTE (hokuten3 @ May 23, 2014 - 5:0... May 24, 2014 - 8:41 AM presure2 QUOTE (Smaay @ May 24, 2014 - 9:41 A... May 24, 2014 - 2:24 PM hokuten3 Finished it today. Took me 6 hours, but Ehh its do... May 26, 2014 - 10:41 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 5:27 PM |