Car Alarm Issue |
Car Alarm Issue |
Aug 11, 2014 - 1:29 PM |
|
Enthusiast Joined Aug 11, '14 From United States Currently Offline Reputation: 0 (0%) |
Hello people of 6gc,
I recently bought my 95 celica 3 days ago and it came with a Clifford car alarm system. It was a straight forward alarm that only locks and unlocks, so i'm guessing its a low end kind. About 2 days ago, the remote would lock and unlock the car but it wouldn't arm the alarm or make the chirping noise. I think I probably hit the something with my foot while driving since the wiring are right under the pedals. Now the alarm light is always on even while driving and I tried to inspect under the pedals but am a little lost. Do i go about resetting something in order to fix this problem? |
Aug 11, 2014 - 3:43 PM |
|
Enthusiast Joined Jul 1, '14 From Hawaii Currently Offline Reputation: 3 (100%) |
Hello people of 6gc, I recently bought my 95 celica 3 days ago and it came with a Clifford car alarm system. It was a straight forward alarm that only locks and unlocks, so i'm guessing its a low end kind. About 2 days ago, the remote would lock and unlock the car but it wouldn't arm the alarm or make the chirping noise. I think I probably hit the something with my foot while driving since the wiring are right under the pedals. Now the alarm light is always on even while driving and I tried to inspect under the pedals but am a little lost. Do i go about resetting something in order to fix this problem? Look on the clifford website and see which car alarm you have. Then look up a video on how to install it. Check all the connections and also look at the manual on the clifford website. There should be a way to reset it (the valet mode button should be the programming button as well). Good luck! |
Lo-Fi Version | Time is now: December 2nd, 2024 - 6:07 PM |