engine swap |
engine swap |
Aug 9, 2014 - 11:49 AM |
|
Enthusiast Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) |
Im looking to swap my engine for a new one. My current 5sfe engine is leaking oil and it has almost 400,000km on it. with that said I am wondering what swap would be easier: 3sge 3sgte or the beams engine. I am also wondering if a clutch from a 5sfe engine will fit any three of the engines listed? thank you for your time.
-------------------- |
Aug 12, 2014 - 1:07 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
10 hp will barely be noticeable. You'll know it's there if you are able to drive a Redtop and Blacktop in the exact same car back to back but otherwise you'll never know it's there. More importantly, the Blacktop will be a pain to swap in, and a money pit. You'll need to buy a Blacktop and a Redtop, and strip the Redtop for parts. The intake manifold and header from the blacktop will not fit in a Celica, nor will the mounts. Plus you'd need to either pay to have the Blacktop harness set up for the Celica or use a Redtop harness, which will still likely need work to fit a Blacktop. It's way too much work and money just for a measly 10 hp. The dual VVT-i is more or less just for emissions. The extra 10 hp from the Blacktop is from the increased compression. The Redtop is by far an easier swap, almost plug and play, and bolts right up to the GT motor mounts, trans, and axles, and many Redtops came with an LSD trans.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Lo-Fi Version | Time is now: November 27th, 2024 - 10:40 AM |