a/c problem, 3sge swap a/c |
a/c problem, 3sge swap a/c |
Aug 27, 2014 - 6:26 PM |
|
Enthusiast Joined Jun 7, '11 From so cal Currently Offline Reputation: 0 (0%) |
well before i swapped my 3s my a/c was working nice but the compressor was making noise, so naturally when i swapped i used the jdm compressor and ever since then i charged the system and now only works when the car is cold or when i'm on the highway. on stop and go it stops working have any of you guys experience this? the only thing I'm guessing that the compressor that i'm using might be for r12 and my car uses 134 since it's a 99.
|
Sep 1, 2014 - 12:15 PM |
|
Enthusiast Joined Dec 3, '13 From Missourah Currently Offline Reputation: 0 (0%) |
hmmm then you've got maybe a problem in the low pressure cut-out switch (connector on pipe near firewall), or you've got some problem with the switch on your AC control, or the connector on the compressor I'd guess.
when the compressor is off the high and low side will equalize and read about the same so that's normal. -------------------- Bust a Deal; Face the Wheel.
|
Lo-Fi Version | Time is now: November 27th, 2024 - 1:14 PM |