Roll center and bump steer, Interest on a solution for lowered cars Options

[cms-gt4]

I am talking to TechnoToyTuning, the same ones who made the tie rod flip kit about making extended ball joints. The tie rod flip kit was meant for the MK1 MR2 but fits the 5th gen celica. If the tierod and ball joints of the 5th gen also fit the 6th gen, this would be a solution for your guys as well.
For those wonder what roll center and bump steer is, check out this article. http://www.motoiq.com/magazine_articles/id...oll-center.aspx
They say if we can get 10 people interested, they can make something similar to this for much less. He expects around $140 for the ball joint and the flip kit is around $70.

Note the final design will be different from this one.


We currently have 6 people interested at alltrac.net so if anyone here is also interested please let me know. Or if you can verify the 5th gen parts fit the 6th gen.

[mkernz22]

Not fully off topic, but that control arm is definitely a good solution to us breaking that crappy tab off that the sway bar mounts to. (Specifically talking about the ST sway bars) If someone could make a mounting point like that for ours, we wouldn't have the issue anymore.