6G Celicas Forums

Welcome Guest ( Log In | Register )

> Car died in traffic.., And it started right back up after havin it towed home.. **FIXED-ECU
post Sep 26, 2014 - 5:50 AM
+Quote Post
kevin311



Enthusiast
*
Joined Dec 23, '12
From North Carolina
Currently Offline

Reputation: 1 (100%)




Thought I had this issue fixed after I replaced the igniter and dizzy last year to fix a code 12. Apparently not. This has happened twice now. Once before replacement parts, and this is the first time since new parts were installed. Left work yesterday and only got about 5 miles and the car sputtered a little and then just knocked off while I was sitting at a stop light. Had it towed home 35 miles and was able to crank it back up and drive it off the rollback.. Temp never got hot, has been staying just under midpoint of temp gauge (is that normal op temp btw?) CEL didn't come on this time either like it had before. It's a '94 GT 5sp. Not sure where to start. I've read it could be coolant temp sensor giving false reading to PCM and killing the engine bc of high engine temp. Does the 5s really have this fail safe?! Thought it was odd. Also read it could be clogged cat converter, but not throwing any codes. Considering I've replaced just about all the ignition components since owning the car I believe it may be fuel related. Any input is appreciated. Thanks in advance guys.

This post has been edited by kevin311: Oct 6, 2014 - 10:13 PM
 
Start new topic
Replies
post Oct 1, 2014 - 9:15 PM
+Quote Post
kevin311



Enthusiast
*
Joined Dec 23, '12
From North Carolina
Currently Offline

Reputation: 1 (100%)




So I got a message from another member on the site who's able to sell me his ECU for $40 shipped, priority. Funds have already been transferred so I should have it in my hands in the next couple days. I f'n love this site. Thanks in advance Lamont

Posts in this topic
- kevin311   Car died in traffic..   Sep 26, 2014 - 5:50 AM
- - VavAlephVav   Sounds like what I just went through. code 12 eit...   Sep 26, 2014 - 10:46 AM
- - kevin311   Yeah I suspect it could be the plug for the dizzy,...   Sep 26, 2014 - 11:38 AM
- - VavAlephVav   Yes, peel back the carpet on both sides (under cen...   Sep 26, 2014 - 11:53 AM
- - jordisonjr   Is 12 the one that says no RPM signal from dizzy? ...   Sep 26, 2014 - 12:07 PM
- - kevin311   Ok cool. Yeah I'm familiar with the ECU locati...   Sep 26, 2014 - 4:44 PM
- - VavAlephVav   well the signal wires for the dizzy run straight f...   Sep 26, 2014 - 8:35 PM
- - kevin311   Awesome, thanks for that. Yeah the plug is quite ...   Sep 26, 2014 - 8:45 PM
- - jordisonjr   That's interesting, my CEL was on for a good p...   Sep 29, 2014 - 9:59 AM
- - kevin311   Yeah that's what's odd. Originally even wi...   Sep 29, 2014 - 10:51 AM
- - VavAlephVav   While you're at it take ohm readings of your c...   Sep 29, 2014 - 11:47 AM
- - kevin311   Will do, when I noticed that, the post I saw on an...   Sep 29, 2014 - 11:52 AM
- - Smaay   check the grounds. the jerking and sputtering soun...   Sep 29, 2014 - 2:54 PM
- - kevin311   Alright, time for an update. Checked the coolant...   Sep 29, 2014 - 4:50 PM
- - brk34   Smell the ecu if its burnt it should have a distin...   Sep 29, 2014 - 6:25 PM
- - VavAlephVav   QUOTE (kevin311 @ Sep 29, 2014 - 4:5...   Sep 29, 2014 - 7:39 PM
- - kevin311   RE: Car died in traffic..   Sep 29, 2014 - 7:47 PM
- - kevin311   Sweet it worked. At first glance I didn't noti...   Sep 29, 2014 - 7:50 PM
- - VavAlephVav   hmmm, I don't think there's anything wrong...   Sep 29, 2014 - 9:01 PM
- - VavAlephVav   this is from the trouble shooting with codes I lin...   Sep 29, 2014 - 9:26 PM
- - Smaay   check continuity between the dizzy and ECU. wiggle...   Sep 29, 2014 - 10:12 PM
- - kevin311   I'll check the continuity this afternoon looks...   Sep 30, 2014 - 11:31 AM
- - VavAlephVav   With this your problem is most likely Not in the w...   Sep 30, 2014 - 12:02 PM
- - kevin311   Ok thanks Vav, I found which pins are for the diz ...   Sep 30, 2014 - 12:24 PM
- - kevin311   Alright, here we go Checked continuity at the ECU...   Sep 30, 2014 - 2:58 PM
- - VavAlephVav   Ya I never trust Haynes or Chilton for wiring diag...   Sep 30, 2014 - 4:09 PM
- - kevin311   Ok, decided to take one last GOOD hard look at the...   Sep 30, 2014 - 4:41 PM
- - Wraithner1   well i do believe you guys have figured out the is...   Sep 30, 2014 - 5:58 PM
- - VavAlephVav   awesome, I was gonna say yesterday that I couldn...   Sep 30, 2014 - 8:21 PM
- - kevin311   I'm glad we were able to help you out Wraith...   Sep 30, 2014 - 9:44 PM
- - VavAlephVav   awesome. good luck with finding a used one. I got...   Sep 30, 2014 - 10:45 PM
- - kevin311   Yeah I'm hoping I get lucky as well lol. Again...   Oct 1, 2014 - 4:20 AM
- - jordisonjr   So the ECU was the problem? Can you update this on...   Oct 1, 2014 - 10:59 AM
- - VavAlephVav   If you examine the board and see black marks and g...   Oct 1, 2014 - 2:44 PM
- - kevin311   I will definitely confirm whether the ECU is the p...   Oct 1, 2014 - 4:54 PM
- - kevin311   So I got a message from another member on the site...   Oct 1, 2014 - 9:15 PM
|- - Lamont   QUOTE (kevin311 @ Oct 1, 2014 - 10:1...   Oct 1, 2014 - 9:26 PM
- - VavAlephVav   Awesome deal!   Oct 1, 2014 - 11:26 PM
- - Lamont   PM'd tracking information. Hope it gets you ba...   Oct 2, 2014 - 8:41 AM
- - kevin311   Thanks for the tracking info Lamont, ECU is expect...   Oct 3, 2014 - 5:19 PM
- - kevin311   Received the ECU today, hooked it up and all seems...   Oct 4, 2014 - 4:48 PM
|- - Lamont   QUOTE (kevin311 @ Oct 4, 2014 - 5:48...   Oct 4, 2014 - 5:12 PM
- - kevin311   Drove the car some Sunday since replacing the ECU,...   Oct 6, 2014 - 9:59 PM
- - jordisonjr   QUOTE (kevin311 @ Oct 6, 2014 - 9:59...   Oct 7, 2014 - 8:28 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 5:52 PM