![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%) ![]() |
Gonna be swapping very soon, already have EVERYTHING except the engine itself which ill be getting in the next 2 or 3 weeks.
my car is lowered (slammed) and I only have about 3 inches of clearance under car. Im thinking of moving the cats up towards the front or just deleting them, and then doing 3 inch exhaust tucked into the driveshaft tunnel that goes to a y pipe that splits up into 2 inch dual exhaust for the back half of the car, that way I can go over the rear suspension and have 2 small mufflers that won't get torn off if I hit a bump. Your thoughts? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) ![]() |
![]() the car is now a 1/5 lower than this picture with the frame rails 3 1/4in off the ground. also am running 3in pretty much turbo back. no issues at all, i know your car is much lower and that's definitely not my taste but i dont see an issue with 3in all the way back and over axle. -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
![]() Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
![]() |
|
Enthusiast ![]() ![]() Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%) ![]() |
![]() the car is now a 1/5 lower than this picture with the frame rails 3 1/4in off the ground. also am running 3in pretty much turbo back. no issues at all, i know your car is much lower and that's definitely not my taste but i dont see an issue with 3in all the way back and over axle. What size wheels are those? -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 2:58 PM |