 bolt sizes? |
 Oct 28, 2014 - 1:27 PM
|
 
|
|
Enthusiast  Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%)  |
Is there any website or manual I can download that will tell me the sizes of all the various bolts on a 3sgte and the 6gc engine bay? Been acquiring tons of parts for my swap and sadly some of them were shipped without bolts, including the tranny (shame on all of you selfish sellers...jk jk)
if not is there anyone with a vast knowledge of our engine bays who can relay the info to me -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)  I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
 |
Replies
|
Oct 28, 2014 - 1:49 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
most everything is a 10, 12, or 14 bolt head. there are a few 17mm bolt that bolt the trans to the block.
10mm are a M6X1 12 are M8X1 (I think) 14 are M10X1.25 bolt lengths will vary for everything, what I typically do looking for a bolt is stick a bolt in the hole. if it goes in about 3/4 of the distance then it should be a good candidate. if It goes in and it almost bottoms out its not long enough -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
Arturio55 bolt sizes? Oct 28, 2014 - 1:27 PM
Arturio55 QUOTE (Smaay @ Oct 28, 2014 - 2:49 P... Oct 28, 2014 - 2:53 PM
njccmd2002 Go to a yard . Get bolts from there. Check ebay ... Oct 28, 2014 - 2:44 PM njccmd2002 any toyota bolt will do, does not have to be from ... Oct 28, 2014 - 7:17 PM Arturio55 QUOTE (njccmd2002 @ Oct 28, 2014 - 7... Oct 29, 2014 - 8:26 AM schmooot m6 x 1
m8 x 1.25
m10 x 1.25
m12 x 1.25
I can conf... Nov 26, 2014 - 12:22 AM Arturio55 QUOTE (schmooot @ Nov 26, 2014 - 12... Nov 28, 2014 - 7:01 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 19th, 2025 - 12:10 PM |