 PCD change from 5x100 to 5x114.3, is it possible with no adaptors? |
 Mar 29, 2014 - 3:58 PM
|
 
|
 Enthusiast  Joined Dec 4, '11 From Greece Currently Offline Reputation: 1 (100%)  |
I'm in the middle of ordering a new set of wheels form Japan.
Problem is: the wheels with the offset I want only comes in 5x114.3  I don't want to use adaptors. So I want to know if the hub of the st205 has enough space for the extra 14+ mm diameter that I'm going to need to drill new holes and put new bolts at the desirable pattern. When I look the hub it seems possible, but I don't know if there is the clearance I need at the inside of it   Anyone here that managed something like that? |
 |
Replies
|
Nov 3, 2014 - 4:23 PM
|
|
|
Enthusiast Joined Dec 4, '11 From Greece Currently Offline Reputation: 1 (100%) |
after lots of searching and researching I gave up with parts I couldn't find here and were expensive to buy new over the internet.
that's my hubs machined and redrilled. a "ring" of metal added around the hub to make it that bigger so the new 114.3 holes are in the hub then new holes drilled the whole surface was smoothed and painted black existing studs pressed in and ready costed 50 euro for each hub of the fronts Rear one are bigger so just redrilling to 5x114,3 was needed  |
Posts in this topic
underground_design PCD change from 5x100 to 5x114.3 Mar 29, 2014 - 3:58 PM
ILoveMySilly97 Yes it's possible. I'm one of the several ... Mar 29, 2014 - 4:32 PM playr158 Search 5x114 conversion. This has been covered for... Mar 29, 2014 - 4:32 PM
ILoveMySilly97 QUOTE (playr158 @ Mar 29, 2014 - 2:3... Mar 29, 2014 - 4:54 PM underground_design That was quick!!!
Thank you for reply... Mar 29, 2014 - 4:54 PM playr158 I've looked at the AWD rav4 and highlander hub... Mar 29, 2014 - 6:12 PM underground_design QUOTE (playr158 @ Mar 29, 2014 - 6:1... Mar 31, 2014 - 3:17 PM Fate QUOTE (playr158 @ Mar 29, 2014 - 7:1... Mar 31, 2014 - 4:58 PM playr158 Fate you rock my world....
how I have to undo the ... Apr 21, 2014 - 12:35 PM Fate QUOTE (playr158 @ Apr 21, 2014 - 1:3... Apr 23, 2014 - 3:51 PM Cuttyman9 I have it done.
Rav4 front hub, 1996-1999 (yes 2... Apr 24, 2014 - 4:42 PM mkernz22 QUOTE (Cuttyman9 @ Apr 24, 2014 - 5... Apr 24, 2014 - 10:37 PM Cuttyman9 Ah fAilWD gotcha.
Use a highlander rear hub. Apr 25, 2014 - 3:53 PM Cuttyman9 I believe you need highlander/rx300 rear hubs and ... Apr 25, 2014 - 4:06 PM underground_design So after several months of waiting , wheels are fi... Jul 16, 2014 - 8:41 AM mkernz22 How did they add that ring there? I'd be kind ... Nov 3, 2014 - 7:43 PM njccmd2002 id be honest, you have to have balls to use that s... Nov 3, 2014 - 8:48 PM underground_design this machine shop is doing conversions like this e... Nov 5, 2014 - 5:07 PM njccmd2002 can you take pic of the back, from the front it se... Nov 5, 2014 - 10:30 PM luka that's actually not a bad way to do it.
the o... Nov 6, 2014 - 1:50 AM underground_design QUOTE (luka @ Nov 6, 2014 - 1:50 AM)... Nov 11, 2014 - 3:29 PM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 22nd, 2025 - 4:10 AM |