 1MZ FE v6 swap starting issues (Fixed & Running), Fixed issue, engine now starts video posted!! |
 Nov 5, 2014 - 7:24 AM
|
 
|
|
Enthusiast  Joined Aug 18, '11 From Cochranville, PA. Currently Offline Reputation: 6 (100%)  |
As some of you know I'm in the process of completing a 1MZ-FE V6 swap into my 94 GT and I am currently having starting issues. I started troubleshooting a few days back once I had the motor installed and all the wiring connected. My findings so far; There is no CEL, I have 0 spark on all 6 cylinders, there is fuel pressure at the rail, and my compression numbers are:
cyl1 - 200 cyl2 - 200 cyl3 - 200 cyl4 - 196 cyl5 - 198 cyl6 - 205 I also don't get the CEL with the key in the "on" position, and as richee3 indicated this means the ECU isn't getting power. I was hoping it was something simple like the igniter, but with no power to the ECU I will try and diagnose why there is no power before buying anymore parts. Today I will check all my fuses and relays with a multi-meter. I would also like to know the ECU power pin locations for the 1MZ-FE so that I can check those as well. This way if power is present at the ECU we can assume that the problem could be a bad ECU. Any help would be great guys!! Thank you Lamont This post has been edited by Lamont: Nov 9, 2014 - 10:48 PM |
 |
Replies
|
Nov 5, 2014 - 6:08 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
ok yes its pink because this is going in an ST correct? I dont have my spreadsheet for your build in front of me but the ST celica its a pink wire. OK good it has constant voltage.
ok with A23 not getting any power you need to check the EFI relay. have someone listen at the relay anr turn the key to ON, you should hear it click. another thing to check is the COR (circuit opening relay) its the relay right next to the ECU for the fuel pump. with the key in the ON position, make sure you have power at pin 2 also check the fuse IGN, its a 7.5 amp fuse. when I get home ill get my spreadsheet out for you and see what color wires are supposed to be This post has been edited by Smaay: Nov 5, 2014 - 6:09 PM -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Nov 5, 2014 - 6:19 PM
|
|
|
Enthusiast Joined Aug 18, '11 From Cochranville, PA. Currently Offline Reputation: 6 (100%) |
QUOTE (Smaay @ Nov 5, 2014 - 6:08 PM)  ok yes its pink because this is going in an ST correct? I dont have my spreadsheet for your build in front of me but the ST celica its a pink wire. OK good it has constant voltage. ok with A23 not getting any power you need to check the EFI relay. have someone listen at the relay anr turn the key to ON, you should hear it click. another thing to check is the COR (circuit opening relay) its the relay right next to the ECU for the fuel pump. with the key in the ON position, make sure you have power at pin 2 also check the fuse IGN, its a 7.5 amp fuse. when I get home ill get my spreadsheet out for you and see what color wires are supposed to be This is going into a 94 GT. I will check the relays and fuses tomorrow. It is too dark to see anything now. |
Posts in this topic
Lamont 1MZ FE v6 swap starting issues (Fixed & Running) Nov 5, 2014 - 7:24 AM
Smaay Lets start with the ECU. what is the part number o... Nov 5, 2014 - 4:24 PM
Lamont QUOTE (Smaay @ Nov 5, 2014 - 4:24 PM... Nov 5, 2014 - 4:49 PM
Lamont QUOTE (Smaay @ Nov 5, 2014 - 4:24 PM... Nov 5, 2014 - 5:54 PM Lamont QUOTE (Smaay @ Nov 5, 2014 - 7:08 PM... Nov 6, 2014 - 8:47 AM Smaay ok i was losing my mind for a second. yes that wir... Nov 5, 2014 - 10:12 PM Smaay ok with the key in the ON position, check the diag... Nov 6, 2014 - 9:30 AM Lamont QUOTE (Smaay @ Nov 6, 2014 - 9:30 AM... Nov 6, 2014 - 3:51 PM Smaay you found the jumper connector and every one of th... Nov 6, 2014 - 4:18 PM Lamont QUOTE (Smaay @ Nov 6, 2014 - 4:18 PM... Nov 6, 2014 - 6:20 PM Smaay yeah thats the one, the cap is there. so now we go... Nov 6, 2014 - 8:19 PM Lamont QUOTE (Smaay @ Nov 6, 2014 - 8:19 PM... Nov 7, 2014 - 3:56 PM Lamont The repair jumper cable did the trick and I was ab... Nov 8, 2014 - 7:54 PM njccmd2002 Wow props to smay. He knows his ****. Nov 7, 2014 - 4:13 PM Lamont QUOTE (njccmd2002 @ Nov 7, 2014 - 5... Nov 7, 2014 - 4:44 PM Box Woooo, now someone should build me one. Nov 8, 2014 - 9:23 PM Arturio55 Looks like that first rev scared her lol.. glad yo... Nov 9, 2014 - 12:27 AM Lamont QUOTE (Arturio55 @ Nov 9, 2014 - 12... Nov 9, 2014 - 10:02 AM Arturio55 QUOTE (Lamont @ Nov 9, 2014 - 11:02 ... Nov 9, 2014 - 11:54 AM Lamont QUOTE (Arturio55 @ Nov 9, 2014 - 12... Nov 9, 2014 - 3:42 PM Box I know in previous swaps allegedly there's not... Nov 9, 2014 - 12:36 PM Arturio55 Yea speaking of, you ever get the paint done on th... Nov 9, 2014 - 6:50 PM Smaay glad you got it running. I cant see your video, sa... Nov 9, 2014 - 9:54 PM kurt95gt I took my v6 swap to 2 shops
both refused to run ... Nov 10, 2014 - 7:11 AM Arturio55 QUOTE (kurt95gt @ Nov 10, 2014 - 7:1... Nov 10, 2014 - 1:09 PM kevin311 Nice work Lamont. Glad you were able to get her ru... Nov 10, 2014 - 7:15 AM kurt95gt I was willing to pay 400 for the catback (witch is... Nov 13, 2014 - 1:35 PM Box Dual 2" would work well, considering the ES30... Nov 13, 2014 - 4:09 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 7:50 AM |