 1MZ FE v6 swap starting issues (Fixed & Running), Fixed issue, engine now starts video posted!! |
 Nov 5, 2014 - 7:24 AM
|
 
|
|
Enthusiast  Joined Aug 18, '11 From Cochranville, PA. Currently Offline Reputation: 6 (100%)  |
As some of you know I'm in the process of completing a 1MZ-FE V6 swap into my 94 GT and I am currently having starting issues. I started troubleshooting a few days back once I had the motor installed and all the wiring connected. My findings so far; There is no CEL, I have 0 spark on all 6 cylinders, there is fuel pressure at the rail, and my compression numbers are:
cyl1 - 200 cyl2 - 200 cyl3 - 200 cyl4 - 196 cyl5 - 198 cyl6 - 205 I also don't get the CEL with the key in the "on" position, and as richee3 indicated this means the ECU isn't getting power. I was hoping it was something simple like the igniter, but with no power to the ECU I will try and diagnose why there is no power before buying anymore parts. Today I will check all my fuses and relays with a multi-meter. I would also like to know the ECU power pin locations for the 1MZ-FE so that I can check those as well. This way if power is present at the ECU we can assume that the problem could be a bad ECU. Any help would be great guys!! Thank you Lamont This post has been edited by Lamont: Nov 9, 2014 - 10:48 PM |
 |
Replies
|
Nov 9, 2014 - 12:27 AM
|
|
|
Enthusiast Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%) |
Looks like that first rev scared her lol.. glad youre done tho
-------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)  I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
|
Nov 9, 2014 - 10:02 AM
|
|
|
Enthusiast Joined Aug 18, '11 From Cochranville, PA. Currently Offline Reputation: 6 (100%) |
QUOTE (Arturio55 @ Nov 9, 2014 - 12:27 AM) Looks like that first rev scared her lol.. glad youre done tho Yeah she said she wasn't expecting it to be that loud. I still have to get the exhaust done and the passenger engine mount, so not quite done yet  |
|
Nov 9, 2014 - 11:54 AM
|
|
|
Enthusiast Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%) |
QUOTE (Lamont @ Nov 9, 2014 - 11:02 AM) QUOTE (Arturio55 @ Nov 9, 2014 - 12:27 AM) Looks like that first rev scared her lol.. glad youre done tho Yeah she said she wasn't expecting it to be that loud. I still have to get the exhaust done and the passenger engine mount, so not quite done yet You going dual? -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
Posts in this topic
Lamont 1MZ FE v6 swap starting issues (Fixed & Running) Nov 5, 2014 - 7:24 AM
Smaay Lets start with the ECU. what is the part number o... Nov 5, 2014 - 4:24 PM
Lamont QUOTE (Smaay @ Nov 5, 2014 - 4:24 PM... Nov 5, 2014 - 4:49 PM
Lamont QUOTE (Smaay @ Nov 5, 2014 - 4:24 PM... Nov 5, 2014 - 5:54 PM Smaay ok yes its pink because this is going in an ST cor... Nov 5, 2014 - 6:08 PM Lamont QUOTE (Smaay @ Nov 5, 2014 - 6:08 PM... Nov 5, 2014 - 6:19 PM Lamont QUOTE (Smaay @ Nov 5, 2014 - 7:08 PM... Nov 6, 2014 - 8:47 AM Smaay ok i was losing my mind for a second. yes that wir... Nov 5, 2014 - 10:12 PM Smaay ok with the key in the ON position, check the diag... Nov 6, 2014 - 9:30 AM Lamont QUOTE (Smaay @ Nov 6, 2014 - 9:30 AM... Nov 6, 2014 - 3:51 PM Smaay you found the jumper connector and every one of th... Nov 6, 2014 - 4:18 PM Lamont QUOTE (Smaay @ Nov 6, 2014 - 4:18 PM... Nov 6, 2014 - 6:20 PM Smaay yeah thats the one, the cap is there. so now we go... Nov 6, 2014 - 8:19 PM Lamont QUOTE (Smaay @ Nov 6, 2014 - 8:19 PM... Nov 7, 2014 - 3:56 PM Lamont The repair jumper cable did the trick and I was ab... Nov 8, 2014 - 7:54 PM njccmd2002 Wow props to smay. He knows his ****. Nov 7, 2014 - 4:13 PM Lamont QUOTE (njccmd2002 @ Nov 7, 2014 - 5... Nov 7, 2014 - 4:44 PM Box Woooo, now someone should build me one. Nov 8, 2014 - 9:23 PM Lamont QUOTE (Arturio55 @ Nov 9, 2014 - 12... Nov 9, 2014 - 3:42 PM Box I know in previous swaps allegedly there's not... Nov 9, 2014 - 12:36 PM Arturio55 Yea speaking of, you ever get the paint done on th... Nov 9, 2014 - 6:50 PM Smaay glad you got it running. I cant see your video, sa... Nov 9, 2014 - 9:54 PM kurt95gt I took my v6 swap to 2 shops
both refused to run ... Nov 10, 2014 - 7:11 AM Arturio55 QUOTE (kurt95gt @ Nov 10, 2014 - 7:1... Nov 10, 2014 - 1:09 PM kevin311 Nice work Lamont. Glad you were able to get her ru... Nov 10, 2014 - 7:15 AM kurt95gt I was willing to pay 400 for the catback (witch is... Nov 13, 2014 - 1:35 PM Box Dual 2" would work well, considering the ES30... Nov 13, 2014 - 4:09 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 3rd, 2024 - 12:56 PM |