 Beams cluster/ISCV |
 Nov 12, 2014 - 12:46 PM
|
 
|
|
Enthusiast  Joined May 8, '14 From Houston Currently Offline Reputation: 1 (100%)  |
Alright guys so im going to buy the Celica SS3 gauge cluster, my tach never worked even with my 7afe, and when i did the beams swap the Speedo stopped working. ( I know the tach would since it needs the distributor ) My question is what would make my speedo not work? or maybe its just the cluster is old?
So if i plug in the JDM cluster everything will or should work? Also im buying a new ISCV, there are two different ones, one is for a manual tranny and one is for the automatic. I can find the Automatic one on ebay for like 40 bucks but not the standard one, does this matter? or can i buy either, basically the part number is AC4211 for the Auto and AC4210 for the manual. Thanks for any help guys -Chris |
 |
Replies
|
Nov 12, 2014 - 1:29 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
if the speed sensor is on a different pin from the other cluster then of course it wont work. Foreign clusters are not 100% compatible with USDM clusters
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Posts in this topic
Rooster92 Beams cluster/ISCV Nov 12, 2014 - 12:46 PM
Rooster92 Right, this engine goes with the JDM Cluster, so i... Nov 12, 2014 - 2:14 PM richee3 The tach and fuel/temp gauges will work but the sp... Nov 12, 2014 - 5:11 PM Rooster92 Hmm okay, that makes sense why i see people who ha... Nov 12, 2014 - 11:43 PM njccmd2002 its been covered several times before in the site.... Nov 13, 2014 - 8:18 AM
Rooster92 So they unscrew Nov 13, 2014 - 1:05 PM njccmd2002 QUOTE (Rooster92 @ Nov 13, 2014 - 12... Nov 13, 2014 - 7:38 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 19th, 2025 - 10:19 PM |