 intercooler pump mod advice (now with a code!) |
 Nov 15, 2014 - 9:16 AM
|
 
|
 Enthusiast  Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%)  |
so i have been on the hunt to find out how to do this and the results have been well... vague to say the least. ive searched around and havent really come across anything to direct on how to do this. could anyone help with a link or a quick write up on how to do this please? i would much appreciate it!
This post has been edited by 4-eyed-freek: Nov 17, 2014 - 8:45 PM -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
 Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
 |
Replies
|
Nov 15, 2014 - 12:21 PM
|
|
|
Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
Yes I have a 205. It's not a swap. So if I run it constantly I will get a 54 code?
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
Posts in this topic
4-eyed-freek intercooler pump mod advice (now with a code!) Nov 15, 2014 - 9:16 AM
Batman722 http://gtfours.co.uk/ Nov 15, 2014 - 9:25 AM Arturio55 I can give you step by step instructions. Email m... Nov 15, 2014 - 9:42 AM 4-eyed-freek http://slender.mine.nu/celica/topic.asp?TOPIC_ID=1... Nov 15, 2014 - 11:09 AM
Arturio55 QUOTE (4-eyed-freek @ Nov 15, 2014 ... Nov 15, 2014 - 12:15 PM Arturio55 QUOTE (4-eyed-freek @ Nov 15, 2014 ... Nov 15, 2014 - 12:23 PM 4-eyed-freek i performed the mod to run the pump all the time a... Nov 17, 2014 - 8:45 PM cardshark525 QUOTE (4-eyed-freek @ Nov 17, 2014 ... Nov 17, 2014 - 9:08 PM 4-eyed-freek all wires were soldered and the ground was cleaned... Nov 17, 2014 - 9:16 PM cardshark525 QUOTE (4-eyed-freek @ Nov 17, 2014 ... Nov 17, 2014 - 11:59 PM 4-eyed-freek well after many tense minutes. the car runs a chec... Nov 18, 2014 - 8:29 PM Arturio55 Just wire in resistors at the ecu and hardwire the... Nov 18, 2014 - 9:22 PM Batman722 wtf did you do ?
Did you read anything from the l... Nov 18, 2014 - 11:16 PM 4-eyed-freek QUOTE (Batman722 @ Nov 19, 2014 - 12... Nov 19, 2014 - 6:52 AM mgnt232 Id like to bring this back from the dead. I've... Jan 18, 2016 - 5:06 AM The_enD Leave it be, why heat up all the coolant compared ... Jan 18, 2016 - 5:30 AM 4-eyed-freek I had the same thoughts, to be honest I would stay... Jan 18, 2016 - 7:59 AM Smaay unless you are sitting at idle for long time, the ... Jan 18, 2016 - 4:12 PM mgnt232 QUOTE (4-eyed-freek @ Nov 15, 2014 ... Jan 20, 2016 - 9:13 PM |
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 1st, 2024 - 1:32 PM |