Timing belt and seals time to be replace Options

[monky322]

Hi guys.

Can any of you inform me what seals have to be replaced when you are replacing your timing belt? My car has 196000 miles. I want to change all the seals near to that part of my car.

Thanks,

[mi645]

whats on ur way are, the 2 cam seals on top, i think 5sfe might be just 1 cam seal from the top.
valve cover gasket,
crank seal,
oil pump seal, make sure the oil pump is good, inspect it.
water pump/water pump gasket, inspect the water pump make sure its not leaking, also push it in and out, from the pulley, see how the bearing feels.
replace the idlers/tensioners, if they make noise or arent smooth replace them, if they look new they should be fine. i would replace them so u dont have to worry about it again, it just makes noise usually, they rarely go bad.
if u have any other questions let me know.

[monky322]

whats on ur way are, the 2 cam seals on top, i think 5sfe might be just 1 cam seal from the top.
valve cover gasket,
crank seal,
oil pump seal, make sure the oil pump is good, inspect it.
water pump/water pump gasket, inspect the water pump make sure its not leaking, also push it in and out, from the pulley, see how the bearing feels.
replace the idlers/tensioners, if they make noise or arent smooth replace them, if they look new they should be fine. i would replace them so u dont have to worry about it again, it just makes noise usually, they rarely go bad.
if u have any other questions let me know.

My mechanic told me that there are three seals that he will change. I don't know how they are called though, but the water pump and the idle puller and tensioner will be changed. He will order the whole timing belt kit. I will ask him about the oil pump and seal as well. Any other suggestion?

Thanks,