 No heat through heater, Solved! |
 Jan 5, 2015 - 5:41 PM
|
 
|
|
Enthusiast  Joined Feb 5, '13 Currently Offline Reputation: 0 (0%)  |
Hi there! I have a 1994 celica ST. I put in a 3 core all alunimum radiator and my car started overheating. It was overheating from air being in the system. I blead it out (as far as i know) and my over heating went away. now i dont have any heat coming out of my heater. I only get warm air. my inlet hose going to the heater core is hot and my outlet hose coming from the heater core is warm but no where near hot much like the air coming out of my vents. I pulled off the in let hose and verified that the heater valve was working and it is. I took off the outlet hose and stuck my garden hose into the inlet side for the heater core and turned it on full blast, there was great water flow going through it. Then I checked the blender door by change the heat to cool very quickly and heard the blender door opening and closing. My coolant was topped off as well. The only thing i can think of is air being in the heater core. I jacked up the front of the car and let the air bleed out. I think this is the correct way to bleed out a system.
This post has been edited by rapid36: Jan 13, 2015 - 10:07 PM |
 |
Replies
|
Jan 6, 2015 - 12:12 PM
|
|
|
Enthusiast Joined Oct 27, '14 From Rio rancho, nm Currently Offline Reputation: 1 (100%) |
Try using a spill free funnel or something similar to bleed the cooling system. You need to get the top point of coolant above the highest point in the cooling system. Jacking it up helps but I don't think it was enough.
|
Posts in this topic
rapid36 No heat through heater Jan 5, 2015 - 5:41 PM
rapid36 QUOTE (Marsstar505 @ Jan 6, 2015 - 12... Jan 6, 2015 - 7:05 PM
Marsstar505 It's the second best tool I've seen to ble... Jan 7, 2015 - 1:36 AM azian_advanced also need to make sure the bleeder nipple on the t... Jan 8, 2015 - 9:52 AM Box After making sure it's been bled properly and ... Jan 8, 2015 - 9:31 PM rapid36 Hmm well i bled the cooling system and there were ... Jan 9, 2015 - 5:21 PM Box It's just odd that the heater core would sudde... Jan 9, 2015 - 5:34 PM rapid36 LOL!!! Yes you are exactly right its a... Jan 9, 2015 - 5:50 PM Box The OEM radiator is notorious for cracking and fai... Jan 9, 2015 - 6:07 PM rapid36 Hey thanks for the information! I was just ind... Jan 9, 2015 - 6:15 PM Box I was going to say use a towel to protect yourself... Jan 9, 2015 - 6:35 PM rapid36 QUOTE (Box @ Jan 9, 2015 - 6:35 PM) ... Jan 9, 2015 - 6:49 PM rapid36 K did the pressure test by taking off the cap. its... Jan 9, 2015 - 8:20 PM Box Silly question, but did you replace the thermostat... Jan 9, 2015 - 8:32 PM Box I know you said something about the inlet and outl... Jan 9, 2015 - 8:37 PM rapid36 Yeah i checked the thermostat and replaced with an... Jan 9, 2015 - 8:44 PM Box It wouldn't decrease heat, if anything it... Jan 9, 2015 - 9:55 PM rapid36 oh ok nice. I just got done flushing the heater co... Jan 9, 2015 - 10:08 PM VavAlephVav The coolant system won't bleed itself the way ... Jan 10, 2015 - 12:21 AM rapid36 QUOTE (VavAlephVav @ Jan 10, 2015 - 1... Jan 10, 2015 - 12:51 AM Box Ditto on raising the front. The Stant OE replacem... Jan 10, 2015 - 12:46 AM Marsstar505 It should be flowing a lot through the heater core... Jan 10, 2015 - 1:52 AM rapid36 I agree it should be flowing a lot and it seems li... Jan 10, 2015 - 4:41 PM rapid36 Hey guys can someone take pictures as well as tell... Jan 10, 2015 - 5:13 PM Marsstar505 Check out this http://bgbonline.celicatech.com/94_... Jan 10, 2015 - 11:17 PM rapid36 Thanks i will use this when performing my repairs.... Jan 11, 2015 - 8:42 PM VavAlephVav Do you "hear" water running through the ... Jan 13, 2015 - 1:51 AM rapid36 QUOTE (VavAlephVav @ Jan 13, 2015 - 1... Jan 13, 2015 - 2:02 AM rapid36 Hey guys i keep on looking up videos on flushing t... Jan 13, 2015 - 11:51 AM VavAlephVav yes I would use air to blow through the heater cor... Jan 13, 2015 - 12:28 PM rapid36 QUOTE (VavAlephVav @ Jan 13, 2015 - 1... Jan 13, 2015 - 2:03 PM Box Yeah, if the core isn't leaking look at the bl... Jan 13, 2015 - 4:38 PM rapid36 QUOTE (Box @ Jan 13, 2015 - 5:38 PM)... Jan 13, 2015 - 5:51 PM Box The only other thing I know to do is get a real co... Jan 13, 2015 - 7:00 PM VavAlephVav did you say you tested the thermostat and verified... Jan 13, 2015 - 9:35 PM rapid36 QUOTE (VavAlephVav @ Jan 13, 2015 - 9... Jan 13, 2015 - 10:05 PM Box QUOTE (VavAlephVav @ Jan 13, 2015 - 8... Jan 13, 2015 - 10:31 PM Box If the thermostat was being stuck open, or if it w... Jan 13, 2015 - 10:14 PM Box Some people see that there's a cooler thermost... Jan 13, 2015 - 10:18 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 12:05 AM |