doing a 3S-GTE swap |
doing a 3S-GTE swap |
Jan 7, 2015 - 12:35 AM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
Ok i have been reading all the threads and I have a few questions for Dustin and others that have done this.
in Bsamps4 thread he says the fuel pump relay is in this box, in the GT the fuel pump relay is also the Circuit opening relay which is mounted on the ECU. so what do I need to use? also it seems like I have to pull pins from the EA1 on the GT chassis side? or do I just have to add pins to it to support the 3S-GTE EA1 engine side plug? would it be easier to do the harness like I do the 1MZ swap. take both harness' apart and morph them into 1 good harness -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Jan 7, 2015 - 11:38 PM |
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
another thing im noticing is the signal for the CEL on the ST205 the signal passes through II2 pin 7 and on the GT is passes through II1 pin 7. is this swapped? the only way to light the CEL on the GT is for the signal to pass through II1
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
Lo-Fi Version | Time is now: November 29th, 2024 - 12:18 AM |