6G Celicas Forums

Welcome Guest ( Log In | Register )

> No heat through heater, Solved!
post Jan 5, 2015 - 5:41 PM
+Quote Post
rapid36

Enthusiast
*
Joined Feb 5, '13
Currently Offline

Reputation: 0 (0%)




Hi there! I have a 1994 celica ST. I put in a 3 core all alunimum radiator and my car started overheating. It was overheating from air being in the system. I blead it out (as far as i know) and my over heating went away. now i dont have any heat coming out of my heater. I only get warm air. my inlet hose going to the heater core is hot and my outlet hose coming from the heater core is warm but no where near hot much like the air coming out of my vents. I pulled off the in let hose and verified that the heater valve was working and it is. I took off the outlet hose and stuck my garden hose into the inlet side for the heater core and turned it on full blast, there was great water flow going through it. Then I checked the blender door by change the heat to cool very quickly and heard the blender door opening and closing. My coolant was topped off as well. The only thing i can think of is air being in the heater core. I jacked up the front of the car and let the air bleed out. I think this is the correct way to bleed out a system.

This post has been edited by rapid36: Jan 13, 2015 - 10:07 PM
 
Start new topic
Replies
post Jan 9, 2015 - 8:32 PM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




Silly question, but did you replace the thermostat as well?


--------------------
2001 Miata LS 5-speed

Posts in this topic
- rapid36   No heat through heater   Jan 5, 2015 - 5:41 PM
- - Marsstar505   Try using a spill free funnel or something similar...   Jan 6, 2015 - 12:12 PM
|- - rapid36   QUOTE (Marsstar505 @ Jan 6, 2015 - 12...   Jan 6, 2015 - 7:05 PM
- - Marsstar505   It's the second best tool I've seen to ble...   Jan 7, 2015 - 1:36 AM
- - azian_advanced   also need to make sure the bleeder nipple on the t...   Jan 8, 2015 - 9:52 AM
- - Box   After making sure it's been bled properly and ...   Jan 8, 2015 - 9:31 PM
- - rapid36   Hmm well i bled the cooling system and there were ...   Jan 9, 2015 - 5:21 PM
- - Box   It's just odd that the heater core would sudde...   Jan 9, 2015 - 5:34 PM
- - rapid36   LOL!!! Yes you are exactly right its a...   Jan 9, 2015 - 5:50 PM
- - Box   The OEM radiator is notorious for cracking and fai...   Jan 9, 2015 - 6:07 PM
- - rapid36   Hey thanks for the information! I was just ind...   Jan 9, 2015 - 6:15 PM
- - Box   I was going to say use a towel to protect yourself...   Jan 9, 2015 - 6:35 PM
|- - rapid36   QUOTE (Box @ Jan 9, 2015 - 6:35 PM) ...   Jan 9, 2015 - 6:49 PM
- - rapid36   K did the pressure test by taking off the cap. its...   Jan 9, 2015 - 8:20 PM
- - Box   Silly question, but did you replace the thermostat...   Jan 9, 2015 - 8:32 PM
- - Box   I know you said something about the inlet and outl...   Jan 9, 2015 - 8:37 PM
- - rapid36   Yeah i checked the thermostat and replaced with an...   Jan 9, 2015 - 8:44 PM
- - Box   It wouldn't decrease heat, if anything it...   Jan 9, 2015 - 9:55 PM
- - rapid36   oh ok nice. I just got done flushing the heater co...   Jan 9, 2015 - 10:08 PM
- - VavAlephVav   The coolant system won't bleed itself the way ...   Jan 10, 2015 - 12:21 AM
|- - rapid36   QUOTE (VavAlephVav @ Jan 10, 2015 - 1...   Jan 10, 2015 - 12:51 AM
- - Box   Ditto on raising the front. The Stant OE replacem...   Jan 10, 2015 - 12:46 AM
- - Marsstar505   It should be flowing a lot through the heater core...   Jan 10, 2015 - 1:52 AM
- - rapid36   I agree it should be flowing a lot and it seems li...   Jan 10, 2015 - 4:41 PM
- - rapid36   Hey guys can someone take pictures as well as tell...   Jan 10, 2015 - 5:13 PM
- - Marsstar505   Check out this http://bgbonline.celicatech.com/94_...   Jan 10, 2015 - 11:17 PM
- - rapid36   Thanks i will use this when performing my repairs....   Jan 11, 2015 - 8:42 PM
- - VavAlephVav   Do you "hear" water running through the ...   Jan 13, 2015 - 1:51 AM
|- - rapid36   QUOTE (VavAlephVav @ Jan 13, 2015 - 1...   Jan 13, 2015 - 2:02 AM
- - rapid36   Hey guys i keep on looking up videos on flushing t...   Jan 13, 2015 - 11:51 AM
- - VavAlephVav   yes I would use air to blow through the heater cor...   Jan 13, 2015 - 12:28 PM
|- - rapid36   QUOTE (VavAlephVav @ Jan 13, 2015 - 1...   Jan 13, 2015 - 2:03 PM
- - Box   Yeah, if the core isn't leaking look at the bl...   Jan 13, 2015 - 4:38 PM
|- - rapid36   QUOTE (Box @ Jan 13, 2015 - 5:38 PM)...   Jan 13, 2015 - 5:51 PM
- - Box   The only other thing I know to do is get a real co...   Jan 13, 2015 - 7:00 PM
- - VavAlephVav   did you say you tested the thermostat and verified...   Jan 13, 2015 - 9:35 PM
|- - rapid36   QUOTE (VavAlephVav @ Jan 13, 2015 - 9...   Jan 13, 2015 - 10:05 PM
|- - Box   QUOTE (VavAlephVav @ Jan 13, 2015 - 8...   Jan 13, 2015 - 10:31 PM
- - Box   If the thermostat was being stuck open, or if it w...   Jan 13, 2015 - 10:14 PM
- - Box   Some people see that there's a cooler thermost...   Jan 13, 2015 - 10:18 PM


Reply to this topicStart new topic
14 User(s) are reading this topic (14 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 2nd, 2024 - 1:02 AM