6G Celicas Forums

Welcome Guest ( Log In | Register )

> doing a 3S-GTE swap
post Jan 7, 2015 - 12:35 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




Ok i have been reading all the threads and I have a few questions for Dustin and others that have done this.

in Bsamps4 thread he says the fuel pump relay is in this box,


in the GT the fuel pump relay is also the Circuit opening relay which is mounted on the ECU. so what do I need to use?


also it seems like I have to pull pins from the EA1 on the GT chassis side? or do I just have to add pins to it to support the 3S-GTE EA1 engine side plug?

would it be easier to do the harness like I do the 1MZ swap. take both harness' apart and morph them into 1 good harness


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
 
Start new topic
Replies
post Jan 12, 2015 - 1:18 PM
+Quote Post
nsxtypeR



Enthusiast
**
Joined Jan 3, '06
From The Netherlands
Currently Offline

Reputation: 6 (100%)




Those pipes underneath the manifold heatshield are part of the anti-lag system toyota was using in wrc. They are non functinal on our cars though


--------------------
JDM ST205

Posts in this topic
- Smaay   doing a 3S-GTE swap   Jan 7, 2015 - 12:35 AM
- - Smaay   this is Dustin's picture, is this a ST205 diag...   Jan 7, 2015 - 12:56 AM
- - njccmd2002   Same as the 2gr   Jan 7, 2015 - 2:06 AM
- - Smaay   2GR has 2 relays in the system? I really dont see ...   Jan 7, 2015 - 8:23 AM
- - njccmd2002   well i went and reviewed several articles, and is ...   Jan 7, 2015 - 10:40 PM
- - Smaay   looking at the drawings I really dont even see a n...   Jan 7, 2015 - 11:30 PM
- - Smaay   another thing im noticing is the signal for the CE...   Jan 7, 2015 - 11:38 PM
- - Batman722   You are correct about the FP relay and resistor. T...   Jan 8, 2015 - 10:45 AM
|- - Smaay   QUOTE (Batman722 @ Jan 8, 2015 - 7:4...   Jan 8, 2015 - 4:18 PM
- - Batman722   np. Eliminating code 54 from the description on h...   Jan 8, 2015 - 8:05 PM
- - Smaay   i havent started anything yet, looking at the GT d...   Jan 8, 2015 - 8:13 PM
- - Batman722   http://www.6gc.net/forums/index.php?showtopic=8219...   Jan 8, 2015 - 9:05 PM
- - Smaay   i have seen the top one a few times, but the secon...   Jan 8, 2015 - 9:29 PM
- - Smaay   ok picked up the engine today. got the engien and ...   Jan 9, 2015 - 11:26 PM
- - Smaay   Started tearing the engine down today. it appears ...   Jan 12, 2015 - 12:06 AM
- - bsamps4   You will end up deleting a lot more than you'd...   Jan 12, 2015 - 11:13 AM
- - Smaay   I have a USDM GT harness coming. I think i can use...   Jan 12, 2015 - 12:56 PM
- - nsxtypeR   Those pipes underneath the manifold heatshield are...   Jan 12, 2015 - 1:18 PM
- - Smaay   deleted   Jan 12, 2015 - 1:58 PM
- - presure2   yup, WRC version. lots of stuff there thats not ac...   Jan 12, 2015 - 2:03 PM
- - Smaay   Thanks Manny, ill do another read on your thread. ...   Jan 12, 2015 - 4:33 PM
- - Box   Smaay, 3S-GTE??? *looks outside for the Seven Hore...   Jan 12, 2015 - 4:48 PM
|- - celicakitten   QUOTE (Box @ Jan 12, 2015 - 5:48 PM)...   Jan 12, 2015 - 10:55 PM
- - Smaay   QUOTE (Box @ Jan 12, 2015 - 1:48 PM)...   Jan 12, 2015 - 10:52 PM
- - Box   Now that everything is right with the world again,...   Jan 12, 2015 - 11:45 PM
- - Smaay   another thing i noticed in the ECU diagram. there ...   Jan 13, 2015 - 12:13 AM
- - bsamps4   I have a 3s compressor if you need it, but to my k...   Jan 13, 2015 - 12:30 PM
- - Smaay   thanks the engine came with a compressor, i just w...   Jan 13, 2015 - 2:07 PM
- - njccmd2002   Im not using any signals from ecu to ac in the 2gr...   Jan 14, 2015 - 3:45 PM
- - Smaay   so i took the 205 harness apart today. well what i...   Jan 15, 2015 - 12:46 AM
- - Smaay   ok here is a picture of the harness with all the l...   Jan 15, 2015 - 9:00 AM
- - bsamps4   On the right track! Still doesn't look lik...   Jan 15, 2015 - 3:43 PM
- - luka   awesome work! I need to get my swap going too   Jan 16, 2015 - 10:59 AM
- - Smaay   for the code 54 fix, what is the wattage needed f...   Mar 23, 2015 - 3:34 PM
- - Box   Just go with what's biggest that'll easily...   Mar 23, 2015 - 4:01 PM
- - Batman722   1/2 watt should be fine.   Mar 23, 2015 - 5:15 PM
- - Smaay   QUOTE (Box @ Mar 23, 2015 - 2:01 PM)...   Mar 23, 2015 - 9:52 PM
- - Smaay   Tore the engine apart, its a good thing I did. the...   Mar 29, 2015 - 7:16 PM
- - Box   Those Japanese people sure are rough on their cars...   Mar 29, 2015 - 7:23 PM
- - Smaay   yeah im sure they abuse the hell out of them, know...   Mar 29, 2015 - 7:33 PM
- - Smaay   well the engine is in. i need a few more -6 A/N fi...   May 30, 2015 - 9:49 PM
- - Box   From what I've seen you have to use the ST-205...   May 31, 2015 - 12:01 AM
- - kloudkicka   I ran into the same problem, yes you can close you...   May 31, 2015 - 8:57 AM
- - Smaay   thanks for the info guys. Im leaning more towards ...   May 31, 2015 - 9:58 AM
- - enderswift   I added 1 inch spacers to the hinges of my gt hood...   May 31, 2015 - 10:47 AM
|- - Smaay   QUOTE (enderswift @ May 31, 2015 - 8...   May 31, 2015 - 4:13 PM
|- - qatar11   QUOTE (enderswift @ May 31, 2015 - 11...   Jun 1, 2015 - 11:26 AM
- - Batman722   We did the same on Stef's car when the 3sgte w...   Jun 1, 2015 - 9:48 PM
- - Smaay   pics please.   Jun 1, 2015 - 10:54 PM
- - enderswift   Like Dustin says, the rear gap actually helps vent...   Jun 1, 2015 - 11:09 PM
- - qatar11   QUOTE (Batman722 @ Jun 1, 2015 - 10...   Jun 2, 2015 - 7:11 AM
- - Smaay   thats not too bad looking. I think we can get awa...   Jun 2, 2015 - 8:10 AM
- - Smaay   ok gurus, having a problem. engine will not star...   Jun 11, 2015 - 11:32 PM
- - Box   Have you tried starting with the throttle open, co...   Jun 12, 2015 - 3:51 PM
- - Smaay   i figured it out. turned out to be bad wiring to...   Jun 12, 2015 - 10:16 PM
- - Smaay   I think i need to do this to defeat code 54 at the...   Jun 12, 2015 - 10:39 PM
- - enderswift   The nipped at the charge cooler is for the ac idle...   Jun 13, 2015 - 1:05 AM
- - Smaay   thats the OEM BOV. maybe because my engine is a W...   Jun 13, 2015 - 9:40 AM
- - enderswift   Just Googled it. You are correct about the bov. I...   Jun 13, 2015 - 10:46 AM
- - Box   Didn't the WRC cars have anti-lag? Could have...   Jun 13, 2015 - 2:58 PM
- - Smaay   it had provisions for an anti lag but it was never...   Jun 14, 2015 - 1:37 AM
- - cardshark525   http://www.6gc.net/forums/index.php?showtopic=8197...   Jun 14, 2015 - 11:06 AM
- - Smaay   thanks for the pics but they really didnt help muc...   Jun 15, 2015 - 7:45 AM
- - presure2   the pic you posted is the anti lag valve. the stoc...   Jun 15, 2015 - 6:21 PM
|- - Smaay   QUOTE (presure2 @ Jun 15, 2015 - 4:2...   Jun 15, 2015 - 7:27 PM
|- - presure2   QUOTE (Smaay @ Jun 15, 2015 - 8:27 P...   Jun 28, 2015 - 9:42 AM
- - Smaay   Thanks Manny.   Jun 29, 2015 - 10:17 PM
- - Smaay   just an update, car is running strong and no code ...   Aug 16, 2015 - 11:06 PM
- - chacha   i have the jdm 3sgte from an st205, have the uk sp...   Oct 8, 2015 - 1:17 AM


Reply to this topicStart new topic
17 User(s) are reading this topic (17 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 25th, 2024 - 10:00 AM