6G Celicas Forums

Welcome Guest ( Log In | Register )

> s54 quaife, can anyone verify?
post Feb 5, 2015 - 1:56 PM
+Quote Post
Arturio55

Enthusiast
**
Joined Mar 6, '13
From New jersey
Currently Offline

Reputation: 4 (83%)




Bought a s54 tranny from a guy in Minnesota. He says it has a quaife. It definitely has an lsd, just want someone familiar with their fair share of differentials to confirm it is in fact a quaife.

If nobody can tell, how hard would it be to crack open that side of the tranny so i can look for a part number or insignia? Not familiar with tranny guts so i would rather not mess anything up.

Any other advice or opinions welcome. Pics below.











--------------------
QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) *
I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league.
 
Start new topic
Replies
post Feb 5, 2015 - 6:21 PM
+Quote Post
enderswift



Enthusiast
*****
Joined Jul 12, '08
Currently Offline

Reputation: 5 (100%)




I just installed a helical into an s54.

Taking apart the trans is not really a good way to go about checking. There's a lot that has to be removed before your reach the diff. I documented a good portion of my rebuild so you might get some answers there:

http://www.6gc.net/forums/index.php?showto...0487&st=340

I would just send a picture of the axle hole to quiafe and ask them



--------------------
post Feb 6, 2015 - 11:21 AM
+Quote Post
Arturio55

Enthusiast
**
Joined Mar 6, '13
From New jersey
Currently Offline

Reputation: 4 (83%)




QUOTE (enderswift @ Feb 5, 2015 - 6:21 PM) *
I just installed a helical into an s54.

Taking apart the trans is not really a good way to go about checking. There's a lot that has to be removed before your reach the diff. I documented a good portion of my rebuild so you might get some answers there:

http://www.6gc.net/forums/index.php?showto...0487&st=340

I would just send a picture of the axle hole to quiafe and ask them


Thanks, i didnt even think about asking quaife themselves lol. Still not sure if they know what each diff looks like installed tho kindasad.gif ill try


--------------------
QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) *
I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league.

Posts in this topic


Reply to this topicStart new topic
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 23rd, 2025 - 3:21 PM