FS: Parting out 5th gen+ 6g side skirts +7g GTS wheels Options

[mx6er2587]

Hokay ladies and gentlemen, here's the deal. I've recently acquired a 1990 Celica GTS that I intend to steal the quarter panels from for my Alltrac. Since I won't be needing much else from the car I figured I would see if any of you fine folks would need any parts.

The car was involved in a front end accident but the 5sfe motor still runs and the 5spd transmission shifts fine. The motor is not idling correctly (very high idle maybe something broken from the impact) but otherwise sounds fine. The transmission shifts and the clutch grabs alright but since I didn't do more than drive it onto/off of the trailer I can't say for sure. Mileage is unknown.

The car has a header installed. Looks to be a generic ebay one, but is in good shape. I'll investigate that more. Also equipped is a very clean set of 7th gen GTS wheels with center caps. Tires are dry rotted junk.

Finally I have, from my private collection, a set of white stock 6g side skirts. Picked them up a long time ago for a project that isn't ever going to happen. Decent shape, some scratches.

I'll get pictures up when there's not 6" of snow out there. Maybe I'll feel ambitious and fire up the motor for a short video.

Pictures and video: http://s1300.photobucket.com/user/mx6er2587/library/

Prices are without shipping:

$250 for the wheels
SOLD $125 for the side skirts SOLD
$50 for the header

Anything else you want just ask. Again pictures are coming

This post has been edited by mx6er2587: Feb 19, 2015 - 11:52 PM

[mx6er2587]

bump again.

Engine and transmission are out of the car now. Still have the header, 7g rims and steering wheel, and also discovered some eibach sportline lowering springs