Negative Camber, alignment specs Options

[VavAlephVav]

So I got an alignment a while back when I did all new struts and everything came out perfect, except for the camber on the front.
Both sides are at -1.5 degrees, the guy told me I could put some shims on it and then bring it in to get it realigned free for the next 6 months.
but I think I'd rather just leave it the way it is. Negative camber is what you want for better cornering right?
How badly do you think it will effect the life of the tires though?



It's pretty funny when some soccer mom is riding my ass into a highway ramp, and then I just leave her way behind.
Ride my ass now Beatch!



thanks

[cardshark525]

You're perfectly fine there, could go up to 2 degrees without much of a difference in tire wear. Toe is what will kill off the life of your tires more than anything else.

If you have a ton of camber your contact patch just shrinks going in a straight line, so you'll see additional wear on the inside, however the tires are still motion wise going straight forward.

If your toe is off... your cars momentum is going forward, but your tires are trying to go to the center of the engine bay essentially. These conflicting forces is what will have you changing tires in a couple thousand miles if it's bad enough.