bloodMoney's Project V.2 Codename: Lily, Let's try this again.... |
bloodMoney's Project V.2 Codename: Lily, Let's try this again.... |
May 19, 2014 - 9:45 AM |
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
It took 6 months of searching, but I finally found another 6g to replace my Abby....
She's a 96 GT 25th anniversary No. 0455. 128,xxx miles, Autofail, tan top. There are a host of issues that need to be fixed, as with any new used car, but this is what I found so far: Needs: Driver's side axle Driver's side wheel bearing Poly bushings all around Struts and springs Fuel filler neck and gaskets Wheels and Tires Quarter Windows need adjusted Door Cards Deck lid leaks on the driver's side There is some rust that needs to be addressed, but luckily it is still at the point where it can be fixed without too much trouble. Once I get the steering/suspension fixed, I'll drive her like that for a bit to confirm that we're ok for daily duty, then we'll begin planning modifications. I'll try and take more pictures as I get the opportunity. I'm just happy to be back in one. This post has been edited by bloodMoney: May 19, 2014 - 9:46 AM -------------------- ~bloodMoney
|
May 27, 2015 - 10:16 PM |
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
The car is back on the ground and seems to be driving alright. Luckily, Jake had a full knuckle that we wasn't using, so I just slapped that on the car to get me back on the road. When I have more time, I'll take the car down to do the brakes, control arms, and bearings the correct way.
I'm in a crunch for time because I have an issue with the wagon and need to get resolved more urgently. Anyway, Thanks again Jake for the quick save! The old hub: -------------------- ~bloodMoney
|
Lo-Fi Version | Time is now: November 28th, 2024 - 5:51 AM |