 Question about catch can, st205 |
 May 28, 2015 - 9:40 PM
|
 
|
 Enthusiast  Joined Aug 7, '05 From Columbus OH Currently Offline Reputation: 3 (100%)  |
I'm looking to get some new fittings and plan on running a catch can, but I first have a question. (See pic below) I'm wondering if I can run both lines pictured to one can, and just have one out to my turbo inlet pipe. I'm not exactly sure what the line coming off the throttle body is for...referencing my manual I believe it just says "air hose". It's currently run to my turbo intake so I imagine this would be an ok solution. Any info is appreciated.
Thanks in advance! 
--------------------  |
 |
Replies
|
May 30, 2015 - 12:14 PM
|
|
 Enthusiast Joined Aug 25, '08 From England Currently Offline Reputation: 1 (100%) |
The line from the throttle body is the air supply when you are on zero throttle so that needs to come from some form of filtered air, ( you should be able to hear it sucking in air on tick over if you disconnect it from the filter) you should not run it through a catch can or need to as it's just sucking in fresh air. The other line from the rocker cover can be run through a catch can if you want.
This post has been edited by Nial: May 30, 2015 - 12:16 PM -------------------- |
Posts in this topic
CELL_PROTOTYPE_X Question about catch can May 28, 2015 - 9:40 PM
CELL_PROTOTYPE_X Anyone? May 30, 2015 - 11:36 AM CELL_PROTOTYPE_X Thanks Nial! Exactly the info I was looking fo... May 30, 2015 - 12:22 PM Sunny Hi,
not good, in the air out of the engine is a l... May 30, 2015 - 1:38 PM CELL_PROTOTYPE_X Thanks Sunny. The engine is fully built. I'm a... May 30, 2015 - 2:41 PM Nial The inlet to the throttle body needs no catch can,... May 30, 2015 - 3:46 PM
Sunny Hi,
np, i would built the system like
- crankcas... Jun 1, 2015 - 8:09 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 6:27 AM |