6G Celicas Forums

Welcome Guest ( Log In | Register )

> check engine while running, help
post May 30, 2015 - 5:25 PM
+Quote Post
empite

Enthusiast
*
Joined Nov 14, '14
From greece
Currently Offline

Reputation: 0 (0%)




Hello guys , I have a half cut st205 that when I start the engine the check turns off and after couple seconds turns on again , 3 things cause this probably and I want to make sure who exactly knows very good the motor .
1)I use a fuel pump that is probably from lower cc engine because the fuel recycling that does (when the pump send the fuel to the fuel filter and after to the engine becks and after all the fuel is more than it needs goes back to the reservoir) is very low I can record it with video if you don't understand what I mean. So does the engine check cause by fuel low compression?
2) does the engine check appears cause some fuel becks needs to be clean? Or the check engine doesn't appear if the fuel becks doesn't work or something like that?
3) theres a valve for idling rpm i think, that's missing

The motor on idling runs with 700 rpm and sounds like needs more fuel or some fuel beck doesn't work...
What do you think guys ?

Thank you in advance
 
Start new topic
Replies
post May 31, 2015 - 1:02 AM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




It's best to pull the code to see exactly what the problem is instead of guessing. Jump a paperclip or short piece of wire between the TE1 and E1 pins in the Diagnostic box then count the number of CEL flashes. I have a thread in the stickies that lists all the codes.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post May 31, 2015 - 3:14 AM
+Quote Post
empite

Enthusiast
*
Joined Nov 14, '14
From greece
Currently Offline

Reputation: 0 (0%)




QUOTE (richee3 @ May 31, 2015 - 1:02 AM) *
It's best to pull the code to see exactly what the problem is instead of guessing. Jump a paperclip or short piece of wire between the TE1 and E1 pins in the Diagnostic box then count the number of CEL flashes. I have a thread in the stickies that lists all the codes.

Yes I know I was already do this yesterday but I didn't have much time , thanks for the advance by the way . what's your knowledge about the fuel on the motor 3sgte ? Is it true that needs bigger fuel pump that 1800cc has ? Cause they told me to buy a supra fuel pump

Posts in this topic


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 25th, 2025 - 11:26 AM