![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Feb 26, '12 From Parkersburg wv Currently Offline Reputation: 1 (100%) ![]() |
I have good compression, timing belt hasn't jumped any teeth. I have fuel and spark but it just cranks and cranks. I have replaced the distributor and when I did it started first couple times but then quit starting again. It does start when pulled. Was thinking crank sensor, any other ideas?
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) ![]() |
its not the crank sensor if you are getting spark. however timing could be responsible. set the crank at TDC (the 0 on the timing cover) and then look at the marks on the cams. they should like up with marks on the back of the cover plate. tons of pics on here that show this.
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
![]() ![]() |
Lo-Fi Version | Time is now: February 17th, 2025 - 7:17 AM |