FS: Red Top Beams Single VVT-I Head Swap Kit Options

[eazy2001x]

Board Name: Eazy2001x
Location: Long Island, NY
Means of Contact: eazy2001x@yahoo.com / PM

Description:

I'm cleaning out my garage.. I am never going to move forward with most of the stuff I have and just have way too much stuff. I am selling a complete Red top Rev 4 3S-GE Auto head kit. You will get the head complete with everything that bolts so it including the fuel rail, injectors, intake manifold, ETC? I will also include the ECU, MAF, un-cut celica SS3 wire harness, Coil's and head studs if you want them. I am firm on my price cause im really just letting this thing go at 500 Plus shipping. If your local enough ill even drive to meet you once payment is received.

There are two problems with this setup. The VVT-I solenoid plug pins were broken and needs to be repaired or replaced. The vacuum port where the brake booster line connects to was bent and needs to be straighten and repaired. There is a small hole where the bend was. You should be able to JB weld it and be fine, its really small. See pics below.

Don?t miss out on your once in a lifetime chance to get everything you need to swap this on your turbo or N/A/ If you were ever looking to Borden your usable power output here it is. Everything about this head is much more improved than the Gen 1/2/3/4 3S-G(TE/E) engine heads. This will also clear your strut tower.

For more information please see my threads:

BEAMS 3S-GE Head On A 5S Block (Need Help/Pics/Info!)
http://www.mr2oc.com/showthread.php?t=206777

BEAMS 3S-GE Head On A 5S Block (Need Help/Pics/Info!) - Part 2
http://www.mr2oc.com/showthread.php?t=434742

Built Gen 2 3S-GTE Head On Gen 4 3S-GE 11:1 CR Block With Gen 2 Oil Pump/Pan
http://www.mr2oc.com/showthread.php?t=580873

Pics:









Thanks,
Eazy

[ricochet1490]

PM'd