Wiring up a ame augo widebanf, 5sfe |
Wiring up a ame augo widebanf, 5sfe |
Jul 12, 2015 - 4:15 PM |
|
Enthusiast Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%) |
How to wire up a wideband o2 sensor to the 5sfe engine? I have a ame augo o2 gauge.
-------------------- |
Jul 26, 2015 - 1:17 PM |
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
As I've said before, it you're missing the resistor then the sensor is useless. The AEM gauge as far as I know has no free air calibration abilities so if you're missing that part of the sensor then the sensor is trash. The resistor IS PART OF the sensor, like how your frontal lobe is part of your brain. No resistor, no sensor. You need to figure out if you have a setup that's prior or after 2014 when they changed the type of sensor then buy the sensor kit with connector. It will not work with the cut off sensor you have now. You need to know if you have a 4.2 or 4.9 gauge as the controllers are different between the types of O2 sensor, use the wrong sensor and you'll fry something or get incorrect readings. You got a ****ty deal if you paid more than $100 to $150 given that the sensor is trash because they cut it off.
Again. YOU NEED A COMPLETE SENSOR MATCHED TO THE CONTROLLER, THERE IS NO OTHER WAY TO MAKE THIS WORK. -------------------- |
Lo-Fi Version | Time is now: November 28th, 2024 - 7:02 PM |