 Which clutch should I use??? |
 Aug 3, 2015 - 4:26 PM
|
 
|
|
Enthusiast  Joined Jul 12, '15 From Iowa Currently Offline Reputation: 1 (100%)  |
Hey guys, I am doing a manual swap in my 95 gt convertible. I now have my parts car, but I am very stressed out trying to decide what clutch to get. I wi be boosting it as well, around 8 psi. Any thoughts on what clutch kit to get for my soon to be 5sfte??? I've been looking at the stage 2 clutch kits on ebay, (xtr, ufc, ppc, fx, emc) these are all around $100, and say the can handle about 268 hp, 248 lbs of torque.
I've seen ppl online saying ebay clutches are junk, n others saying they are not....I would appreciate any input or experiences anyone has had. I've also looked a bit into Exedy, ACT, and Competition Clutch. Any input on these as well? Are they worth the extra $300?? I will be driving my car around town, not any race tracks. I dont want it too gabby to where it's annoying to drive in stop n go traffic, but I don't want it slipping at all under boost when I get on it. Please anyone's input, I'm driving myself nuts trying to decide!! |
 |
Replies
|
Aug 3, 2015 - 8:29 PM
|
|
|
Enthusiast Joined Jul 12, '15 From Iowa Currently Offline Reputation: 1 (100%) |
QUOTE (Lamont @ Aug 3, 2015 - 8:51 PM)  Get an Exedy clutch and an OEM throw out bearing and you'll be good for quite some time. Which exedy clutch would be sufficient? And would I get the exedy pressure plate too? The exedy clutches are hard to find for this car...anyone know a good place to get one? |
Posts in this topic
JohnnyGat0519 Which clutch should I use??? Aug 3, 2015 - 4:26 PM
Box For the love of all that is good don't buy an ... Aug 3, 2015 - 7:24 PM Lamont Get an Exedy clutch and an OEM throw out bearing a... Aug 3, 2015 - 7:51 PM JohnnyGat0519 The only Exedy clutch I can find for my car is the... Aug 3, 2015 - 8:39 PM Jmk91 Act makes great clutches in general and ones that ... Aug 3, 2015 - 8:44 PM JohnnyGat0519 QUOTE (Jmk91 @ Aug 3, 2015 - 9:44 PM... Aug 3, 2015 - 8:53 PM Smaay ACT clutches have gone to crap. their quality and ... Aug 3, 2015 - 9:25 PM
Jmk91 QUOTE (Smaay @ Aug 3, 2015 - 10:25 P... Aug 3, 2015 - 10:13 PM JohnnyGat0519 QUOTE (Smaay @ Aug 3, 2015 - 10:25 P... Aug 3, 2015 - 10:33 PM JohnnyGat0519 QUOTE (JohnnyGat0519 @ Aug 3, 2015 - 10... Aug 4, 2015 - 9:19 AM Box Southbend, that's the one I was thinking of. ... Aug 4, 2015 - 11:10 AM Smaay if you are staying all motor, no boost, then you o... Aug 4, 2015 - 11:35 AM Box He said in the first post was doing 8 psi, otherwi... Aug 4, 2015 - 11:36 AM JohnnyGat0519 QUOTE (Box @ Aug 4, 2015 - 11:10 AM)... Aug 4, 2015 - 11:56 AM trdproven southbend and comp clutches Aug 4, 2015 - 8:21 PM Box The stock 5S makes 145 ft lbs, figure in 8 pounds ... Aug 5, 2015 - 12:07 AM Smaay just get the daily use one. you dont need 300lbs ... Aug 5, 2015 - 1:11 AM JohnnyGat0519 I saw in the dyno results page, and it seemed that... Aug 5, 2015 - 9:11 AM Smaay QUOTE (JohnnyGat0519 @ Aug 5, 2015 - 7... Aug 6, 2015 - 5:43 PM doory100 I just put a phoenix friction clutch in my 95... Aug 5, 2015 - 9:12 PM Box Listen to the Smaay, he's been there and done ... Aug 6, 2015 - 5:47 PM JohnnyGat0519 QUOTE (Smaay @ Aug 6, 2015 - 5:43 PM... Aug 6, 2015 - 8:38 PM Smaay 225 will be fine. Aug 7, 2015 - 1:54 AM JohnnyGat0519 QUOTE (Smaay @ Aug 7, 2015 - 2:54 AM... Aug 7, 2015 - 6:56 AM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 12:20 PM |